Posted: Sat Nov 23, 2019 1:45 Post subject: MAC filtering broken if a VAP is configured [SOLVED]
So, I have a wl0.1 configured to provide my guests an internet connection on a separate network. Works very well!
But now I notice that MAC filtering is broken on both wl0 and wl0.1. I tried both modes: black list (don't allow MACs in the list) and white list (allow only the MACs in the list), and it just ignores the list completely.
MAC filtering works fine on interfaces where virtual interface is not present e.g. wl1 (5Ghz)
I am running the Nov 11, 2019 snapshot (11-11-2019-r41517). I was previously running Jul or Aug snapshot and updated to see if the issue was fixed in later versions.
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Tue Dec 03, 2019 17:12 Post subject:
devsk wrote:
IS there a place where we can file bugs?
point 12
Below some pointers which might help to get the best out of DDWRT and out of the forum:
1. Research your router, start with the supported devices wiki:
https://wiki.dd-wrt.com/wiki/index.php/Supported_Devices .
2. In the supported devices wiki you can see if your router is supported and what architecture your router has and if you are lucky also an install guide/wiki.
3. Post in the right forum, from the former step you can see if your router is Broadcom, Qualcomm/Atheros, Marvell or other, use that forum to post router specific questions, for networking questions post in the Advanced Networking forum and for other things in the General Questions forum.
4. When posting always state router model, build number and when applicable the Kernel version.
Describe your problem and how you think it can be solved.
Give as much detail as you can also provide your network setup if applicable.
For your Network setup, state what wiki you have used: https://wiki.dd-wrt.com/wiki/index.php/Linking_Routers
5. When posting pictures make sure the maximum width is not more than 600 pixels.
6. Do not hijack a thread, meaning do not post your own problem in someone else's thread. Just start your own thread.
7. If your post is answered and your problem solved, mark your thread with [SOLVED] (the header of your first post).
8. Do NOT use the router database, builds can be found at:
https://dd-wrt.com/support/other-downloads/?path=betas%2F2019%2F
All builds are beta including those from the router database.
9. Before uploading a new build to your router, research the build by looking in the build threads.
This is an example of a build thread for build 41328 for Broadcom routers:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321699&highlight=41328
Search build threads with the search function and search on build number.
10. Use the build threads from the former step to report success or problems.
11. For older Broadcom routers (Linksys WRT54 and E series) read the peacock thread although some of it is outdated: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=51486
Builds can be found in the Broadcom directory for Linux kernel 2.4, in Broadcom_K26 for Linux K2.6 and in Broadcom_K3X for Linux K3.X.
12. If you are sure you have discovered a bug, after asking and querying the forum, you can report a real bug in the bug tracker: https://svn.dd-wrt.com/
This is also the place where the commits/changes to the source are administrated.
13. Recommended reading:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=54845 https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=54959
14. If you are happy with DDWRT and want it to live on then donate:
https://dd-wrt.com/donations/ _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399 Install guide R7800/XR500:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614 Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Yes, please, add another bug ticket about a previously reported issue. I will have to find it, but I'm fairly certain this was reported already.
I did a quick search on "mac filter" on svn.dd-wrt.com and it did not turn up anything related to mac filtering not working when a virtual interface is in play.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Tue Dec 10, 2019 7:00 Post subject:
ticket closed. unclear description. issue seem to be unrelated to access restrictions, but wireless mac filtering. device description is missing too _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s