[egc]

Welcome to Broadcom r54517 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 54475 (mirror)

• OpenVPN 2.6.8: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• 4.4 cURL Gateworks 3.10 LTO QMI mac80211 rtl8156b x86 DC Marvell hostapd PCI bs Tor SFE bridge Unbound USB invalid
• jffs2 dco 6.1 4.14 ath11k wrt1900ac clk o3 DC ea8500 serial Marvell 6.1 MT ksmbd Plex Newport labels mac80211 mwlwifi
• r54203 r54248 r54420 r54475 r54517

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r54517) / Linux 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r54475 std (12/07/23) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + USB Storage high-speed (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

[egc]

Router Model: Linksys E2000 (converted N320)

Firmware Version: DD-WRT v3.0-r54517 mega (12/15/23)
Kernel Version: Linux 4.4.302-st47 #27495 Fri Dec 15 05:53:24 +06 2023 mips

Upgraded: from DD-WRT v3.0-r52148 mega (03/26/23)
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (tun) (on Keepsolid) up and running, VPN download (speed 5 Mb/s), Wifi 2,4GHz working.
WireGuard client working one tunnel in fail over group to Mullvad, one tunnel as site-to-site setup to remote VPS.

Some simple speed testing (timed file up and downloading)
Without SFE: 40 /40 Mb/s, U/D
With SFE: 170/170 Mb/s U/D
With CTF: 260/320 Mb/s U/D

Errors: Nothing encountered yet, Seems like a good build,

Big Thanks to the devs!!

[rubeni]

Asus RT-AC88U
12-15-2023-r54517
experimental driver

issue Continue.
Ticket issue https://svn.dd-wrt.com/ticket/7728

Revert back DD-WRT v3.0-r54420 std (12/04/23)

[egc]

Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r54517M Community Build (12/14/23)
Kernel Version: Linux 4.4.302-st47 #1 SMP Thu Dec 14 08:38:35 CET 2023 armv7l

Upgraded from: DD-WRT v3.0-r54095M Community Build (11/21/23)
Reset: No not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, 2.4 GHz with unbridged VAP and 5 GHz.
Running one WireGuard tunnel to Mullvad with IPv6 and second WireGuard tunnel to own WG server for site-to-site connection also with IPv6.
OpenVPN client tested and working.
IPv6 working

Errors: Nothing encountered yet.

Big Thanks to BS and other forum members and developers.

[par13del]

Router: R7000
Firmware: DD-WRT v3.0-r54517 std (12/15/23)
File: R54517
Kernel: Linux 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l
Previous: R54475
Reset: Upgrade via Web GUI no reset
Mode: Gateway, AP, Router behind ISP Router
Status: Operational with Wireguard Client, uptime 25min @ 10:06am EST @ 15Dec2023
Issues:
Observation: Nothing as yet.

[KACTET]

Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r54517 std / Linux 4.4.302-st47 #10678 SMP Fri Dec 15 04:54:56 +06 2023 armv7l
Previous/Reset: r54475 / no
Mode/Status: Gateway / Up and running for 2:09 hours
Issues/Errors: Nothing significant

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."

The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax

[Ger482]

Router Model:Asus RT-AC68U
Firmware Version: DD-WRT v3.0-r54517 std (12/15/23)
Kernel 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l
Upgraded from: r54420
Reset: no
Status: Up and stable very good throughput
running Wireguard
Errors: none

Thank-You! to everyone involved

[Alozaros]

Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r54517 std (12/15/23)
Kernel Version Linux 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l

update: CLI r54475 > r54517
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...Thanks BS and Team !

[jrscs]

Router/Version: R6400 V2 (board id=U12H332T30_NETGEAR)
Firmware: DD-WRT v3.0-r54517 std (12/15/23)
Kernel: Linux 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l
Previous: DD-WRT v3.0-r54475 std (12/07/23)
Update Method: SSH / CLI using PuTTY
Mode/Status: Repeater Bridge 5Ghz (AC Only) /OK
Reset: No
Setup:
2.4 GHz N/G Mixed 20 MHz WPA2-PSK (AES)
Issues/Errors: None

[KACTET]

Router/Version: Linksys WRT54GL v1.1
Update method: WebUpgrade
File/Kernel: dd-wrt.v24 mini generic_r54517M / Linux 2.4.37 #73429 Fri Dec 15 03:13:41 +06 2023 mips
Previous/Reset: r54248M / no
Mode/Status: AP wired and wireless / Up and running for 2:49 hours
Issues/Errors: Nothing significant

Thank you BS and gurus!

[mac913]

OffSite #1
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r54517 std (12/15/23)
Kernel Version: Linux 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l
WiFi Firmware: Broadcom BCM4360 802.11 Wireless Controller 7.14.164.18 (r692288)
Previous Build/Reset: DD-WRT v3.0-r54079 std (11/17/23) / NO, CLI Update & Reboot
Mode/Status: GW & AP / Working
Issues/Errors: none / none
Services Used: 2.4Ghz-20Mhz & 5Ghz-80Mhz Radios,DHCP-WAN,IPv6-6to4,NTP,WG,VLAN-GUI,WG-Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.2
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Running for over 25 hours.

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

[Wildlion]

Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r54517 std)
Kernel: Linux 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l
Status: Working
Reset: No
Notes on configuration:

Media Network
DNSMasq
Port Forwarding
DHCP reservation
DNSSEC
SFE -- Disabled

Errors:

None

[Newbrain]

Asus RT-AC68U
Firmware: DD-WRT v3.0-r54517 std (12/15/23) - (previous r53843)
Kernel: Linux 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l
5Ghz (Mixed) with 80Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 20 minutes
CPU Temperature: CPU 81.4 °C / WL0 54.0 °C / WL1 52.0 °C (Will start fan again to bring CPU temp down)

Edit: CPU Temp down 15°C, now at about 65.2°C Must mean something for the lifetime of the device..

Linksys E2000 (2 in use)
Firmware: DD-WRT v3.0-r54517 mega (12/15/23)- (previous r53843)
Kernel: Linux 4.4.302-st47 #27495 Fri Dec 15 05:53:24 +06 2023 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 31 minutes
CPU Temperature: WL0 51.8 °C / WL0 53.0 °C

All devices working as AP's each with individual 1Gb wired connections to main firewall.

As always, thanks to BS and everyone else

[strange]

Netgear R6700 v3 – Station Bridge
Firmware Version: DD-WRT v3.0-r54517 std (12/15/23)
Kernel Version: Linux 4.4.302-st47 #10670 SMP Thu Dec 14 06:41:05 +06 2023 armv7l
Temperatures: CPU 67.5 °C / WL1 53.7 °C
Current Time: Sun, 17 Dec 2023 14:17:32
Uptime: 4:35
Reset: No
CL install over r54248

No issues

Thank you BS and gurus.