Posted: Tue Feb 28, 2023 11:00 Post subject: New Build - 02/28/2023 - r51887
Welcome to Broadcom r51887 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Tue Feb 28, 2023 12:08 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r51887 std (02/28/23) Kernel: Linux 4.4.302-st37 #8801 SMP Tue Feb 28 02:33:40 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 02-25-2023-r51855 Status: Working really well so far; Wireless performance is improved, still testing. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken.) Temperatures: CPU 54.7 °C / WL0 48.1 °C / WL1 49.9 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest-3.jpg
Description:
Speedtest Over 5.8GHz Wireless. ISP Spec: 500 Mbps Down / 25 Mbps Up.
Filesize:
60.9 KB
Viewed:
2411 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Linksys E2500
DD-WRT v3.0-r51887 mega (02/28/23)
Linux 4.4.302-st37 #21985 Tue Feb 28 04:20:32 +06 2023 mips
'dd-wrt.v24-51887_NEWD-2_K3.x_mega.bin'
scp 'firmware.bin' install over r51838
all ok
HOME Wired Multicast ISP 4K TV Network Router/Version: R7000
File/Kernel: DD-WRT v3.0-r51887 std (02/28/23)
Kernel Version: Linux Linux 4.4.302-st37 #8801 SMP Tue Feb 28 02:33:40 +06 2023 armv7l
Previous/Reset: r51838 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW / PVR & SSH Issues - Fixed
Issues/Errors: Missing PVR Recordings, Slow SSH connections via LAN / logs looked fine - Fixed
Services Used: Multicast,CTF,SSH,Syslog
Services Disabled: 2.4 & 5Ghz Radios,FA,QoS,ttraff,Telnet,NAS,Samba,IGMP Snooping
Tried to fix issues by rebooting but thst didn't work. Re-applied Services, Managment, Basic Setup & Networking Tabs
After 19 hours it looks like all is GOOD!
OffSite #1 Router/Version: R7000
File/Kernel: DD-WRT v3.0-r51887 std (02/28/23)
Kernel Version: Linux 4.4.302-st37 #8801 SMP Tue Feb 28 02:33:40 +06 2023 armv7l
Previous/Reset: r51741 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW & AP / SSH Issues - Fixed
Issues/Errors: Slow & SSH disconnections via WAN / didn't see anything in the Logs - Fixed
Services Used: 2.4 & 5Ghz Radios,CTF,DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: FA,QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Tried to fix issues by rebooting remotly but thst didn't work. Re-applied Services, Managment, Basic Setup & Networking Tabs. These tasks only worked on a remote stable SSH connection which took a couple of hours of re-trying to reconnect every 10min.
After 19 hours it looks like all is GOOD!
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Firmware: v3.0-r51887 std (02/28/23)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st37 #8801 SMP Tue Feb 28 02:33:40 +06 2023 armv7l
Previous: v3.0-r51787 std (02/20/23)
Mode/Status: AP wired and wireless / Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 58.0 °C / WL0 45.0 °C / WL1 50.2 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (Bell Canada "Fibe", 500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 N/G Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Netgear R6700 v3 – Station Bridge
Firmware Version: DD-WRT v3.0-r51887 std (02/28/23)
Kernel Version: Linux 4.4.302-st37 #8801 SMP Tue Feb 28 02:33:40 +06 2023 armv7l
Temperatures: CPU 66.9 °C / WL1 53.3 °C
Current Time: Thu, 02 Mar 2023 19:16:41
Uptime: 1 day, 57 min
Reset: No
CL install over r51855
No issues
Thank you BS and gurus. _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Posted: Fri Mar 03, 2023 12:36 Post subject: Re: Netgear Nighthawk R7000
twindragon6 wrote:
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r51887 std (02/28/23) Kernel: Linux 4.4.302-st37 #8801 SMP Tue Feb 28 02:33:40 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 02-25-2023-r51855 Status: Working really well so far; Wireless performance is improved, still testing. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken.) Temperatures: CPU 54.7 °C / WL0 48.1 °C / WL1 49.9 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Are the speed tests significant?
They seem to vary with builds, but is this just a reflection of your ISP speed?
