Posted: Thu Dec 09, 2021 4:24 Post subject: New Build - 12/09/2021 - r47822
Welcome to Atheros r47822 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg' 'cat /tmp/var/log/messages', syslog klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Linksys EA8500...main gateway router
DD-WRT v3.0-r47822 std (12/09/21)
Linux 4.9.292 #574 SMP Wed Dec 8 20:43:45 +07 2021 armv7l
changed 'dd-wrt-webupgrade.bin' to 'firmware.bin'
scp firmware.bin to its /tmp directory and let it install ---
installed over r47810
all worky very good -- uptime 5:23
#
Netgear WNDR3700 V4...used as a switch
DD-WRT v3.0-r47822 std (12/09/21)
Linux 3.18.140-d6 #131178 Thu Dec 9 07:59:21 +07 2021 mips
scp 'wndr3700v4-webflash.bin' as 'firmware.bin' to its /tmp ---> installed over r47810
all good -- up 4:26
Status: Up and running for 4 hours , basic setup as Gateway, static leases, 2,4GHz, 5Ghz (Vanilla Firmware), USB storage NAS working, OpenVPN client to Keepsolid with PBR working.
WireGuard client to Keepsolid working , WireGuard client for site-to-site setup to own server working.
WireGuard server(backup for one phone), working
Upgraded from: DD-WRT v3.0-r47692 std (11/28/21)
Reset: No not this time
Status: Up and running for 4 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz working (vanilla firmware).
WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location)
OpenVPN Server working
(1) Incoming & Outgoing logs show nothing (not a new issue)
(2) Although the build did load the leases file on reboot, I had to erase /tmp/dnsmasq.leases, uncheck Use JFFS2 for client lease DB, Apply, re-check and Apply, to get leases to start updating to /jffs.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Thu Dec 09, 2021 17:40 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r47822 std (12/09/21)
Kernel Version Linux 3.18.140-d6 #131150 Thu Dec 9 07:05:25 +07 2021 mips
update: CLI r47720 > r47822
reset: NO
mode: Gateway
status: Operational 4h+
errors: Nothing new, yet...10Q dev's and BS ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router/Version: TP-Link Archer C7 v2
File/Kernel: Linux 3.18.140-d6 #131156 Thu Dec 9 07:15:39 +07 2021 mips
Previous/Reset: r47745 / no
Update method: GUI
Mode/Status: Gateway / working
Issues/Errors: Non sofar. Running less than 1 hour
Thanks BS and to everyone who contributed. _________________
1x TP-Link Archer C7 V2.0 r48432 (Primary router at primary location. Former Ziggo repeater)
1x TP-Link Archer C7 V2.0 OpenWrt 21.02.3 (Testing at primary location. Former Ziggo repeater)
1x TP-Link Archer C7 V5.0 r48540 (Secondary router at primary location)
1x TP-Link Archer C7 V5.0 OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WR1043ND V4.0 OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) r48646 (Primary router at secondary location)
1x TP-Link WDR4900 V1.3 (blue leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (blue leds) r47925 (Testing at secondary location)
1x Linksys WRT160NL r48494 (Guest network with QoS at secondary location)
1x Linksys WRT54G V2.0 r14929 (Switched off at secondary location)
1x Linksys WRT54GL V1.1 r14929