Posted: Mon Aug 23, 2021 6:12 Post subject: New Build - 08/23/2021 - r47225
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Mon Aug 23, 2021 13:11 Post subject:
Router Model & Version: TP-Link TL-WA901ND v2
Firmware: DD-WRT v3.0-r47225 std (08/23/21)
File: tl-wa901ndv2-webflash.bin
Kernel: Linux 3.10.108-d11 #88802 Mon Aug 23 03:40:55 +07 2021 mips
Previous: DD-WRT v3.0-r47135 std (08/07/21)
Reset: No
Mode: AP
Uptime: ~12hrs
Status: Ok
Issues/Errors: None
Router Model & Version: TP-Link WR1043ND v2
Firmware: DD-WRT v3.0-r47225 std (08/23/21)
File: tplink_tl-wr1043nd-v2.bin
Kernel: Linux 3.18.140-d6 #123944 Mon Aug 23 04:34:25 +07 2021 mips
Previous: DD-WRT v3.0-r47135 std (08/07/21)
Reset: No
Mode: Wireless Client / Gateway
Uptime: ~12hrs
Status: Ok
Issues/Errors: None
Router Model & Version: Netgear R7800
Firmware: DD-WRT v3.0-r47225 std (08/23/21)
File: dd-wrt-webupgrade.bin
Kernel: Linux 4.9.280 #389 SMP Mon Aug 23 00:43:39 +07 2021 armv7l
Previous: DD-WRT v3.0-r47135 std (08/07/21)
Reset: No
Mode: AP / Gateway
Uptime: ~12hrs
Status: Ok
Issues/Errors: None _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Mon Aug 23, 2021 17:57 Post subject:
AP 1
Router/Version: TP-Link ARCHER-C7 v2/DD-WRT v3.0-r47225 std (08/23/21)
File/Kernel: Linux 3.18.140-d6 #123950 Mon Aug 23 04:44:36 +07 2021 mips
update method: GUI install
Previous/Reset: DD-WRT v3.0-r47206 std (08/19/21)
Mode/Status: AP connected via LAN, DHCP disable, WIFI 2.4/5ghz - Vanilla, MAC filter
Reset: No
Status: at the moment everything OK
Issues/Errors: at the moment everything OK
AP 2
Router/Version: TP-Link ARCHER-A7 v5/DD-WRT v3.0-r47225 std (08/23/21)
File/Kernel: Linux 3.18.140-d6 #123956 Mon Aug 23 04:56:03 +07 2021 mips
update method: GUI install (CLI update still no working at all in this device) Previous/Reset: DD-WRT v3.0-r47206 std (08/19/21)
Mode/Status: AP connected via LAN, DHCP disable, WIFI 2.4/5ghz - Vanilla, MAC filter, Wifi Printer/scanner
Reset: No
Status: at the moment everything OK, Led lights problem remains
Issues/Errors: at the moment everything OK, Led lights problem remains
AP 3
Router/Version: TP-Link ARCHER-A7 v5/DD-WRT v3.0-r47225 std (08/23/21)
File/Kernel: Linux 3.18.140-d6 #123956 Mon Aug 23 04:56:03 +07 2021 mips
update method: GUI install (CLI update still no working at all in this device) Previous/Reset: DD-WRT v3.0-r47206 std (08/19/21)
Mode/Status: AP connected via LAN, SFE, DHCP disable, WIFI 2.4/5ghz - Vanilla , MAC filter, public VAP or WAP
Reset: No
Status: at the moment everything OK, Led lights problem remains
Issues/Errors: at the moment everything OK, Led lights problem remains _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Posted: Wed Aug 25, 2021 3:57 Post subject: TP-Link ARCHER-C7 v4
Update method: GUI
Router/Version: TP-Link ARCHER-C7 v4
File/Kernel: DD-WRT v3.0-r47225 std (08/23/21)
Previous/Reset: DD-WRT v3.0-r47033 std (07/08/21) / No
Mode/Status: Gateway / Working Normally BUT
Issues/Errors: Cannot login to GUI. I am able to telnet into the router using the same password.
I have tried with username and without username (root) still cannot login.
As I did not enable SSHd so unable to use putty to SSH into it too, gives Connection Refused error.
As I am a little noob in this. Can I flash the DD-WRT v3.0-r47033 std (07/08/21) using telnet directly over this new version? Or should I need to do something else too? Please put me into some direction, new to the router firmware game.
Have searched but didn't find any specific results. Hence the account and this report.
Edit:
Did a reset and still the same issue. I have kept the username in GUI blank.
Edit 2:
Did a reset again and this time I created a username. Now the GUI login works. Sorry for all the confusion. Now it works
Joined: 25 Dec 2020 Posts: 90 Location: Toronto - Canada
Posted: Wed Aug 25, 2021 11:49 Post subject:
Router Model & Version: Netgear R7800
Firmware: DD-WRT v3.0-r47225 std (08/23/21)
File: dd-wrt-webupgrade.bin
Kernel: Linux 4.9.280 #389 SMP Mon Aug 23 00:43:39 +07 2021 armv7l
Reset: Yes
Mode: Gateway
Uptime: 5hrs
Status: Operational
Issues/Errors: Issues with setting Access Restriction past 1. When selecting 2 or higher to setup, page refreshes and defaults back to 1. Other than that, up and running
Already an open case for the Access Restriction issues. #7457