[skydivingnerd]

Playing around with an old WRT54Gv3 with v24-sp2-mini (8/12/10) in Router mode just to see if I can isolate several IP cameras and DVR from my main network. (I know it's old but I prefer to try and repurpose old hardware rather than disposing of it and this is more for my own education than a critical function.)

I just put 47822 on a couple R7000s and I was wondering if there anything newer I could be loading on the WRT54G. I looked through the download directories and there are wrt54gv7 directories going back to 4/9/11 but nothing for v3.

I also searched the forum and found a thread where 47695 was put on a GS but I have a G which I imagine does not have the same hardware resources.

[egc]

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2021/12-09-2021-r47822/broadcom/

See the forum guidelines with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

I have a 54GS running in my holiday home, upgraded about 7 weeks ago, but that can have mega builds as it has 8 MB flash, yours has 4 MB I think so you should have the mini builds but do not take my word for it

[kernel-panic69]

Indeed, 4MB flash; note in wiki about firmware image sizes, but current should be ok:

https://wikidevi.wi-cat.ru/Linksys_WRT54G_series#WRT54G
https://wikidevi.wi-cat.ru/Linksys_WRT54G_v3.0
https://wiki.dd-wrt.com/wiki/index.php/Linksys_WRT54G_v3.0

Avoid mega and special_vpn images; they are not for your router.

[skydivingnerd]

Just like the R7000, I couldn't use the same config but once I re-entered it manually it worked great. Thanks!

[kernel-panic69]

You're welcome. We try to help, if we can