Joined: 21 Jan 2017 Posts: 1783 Location: Illinois Moderator
Posted: Thu Feb 11, 2021 22:09 Post subject:
You first will need to reset the router back to factory defaults before the update on the older build.
NVRAM mappings have changed several times and will spawn gremlins if you don't.
Once you've upgraded you need to do another factory reset again to clear any mapping issues.
Then set up your settings from scratch. You cannot load old settings or they will point to old nvram mappings and spawn gremlins.
Three ways to factory reset.
1-Hold reset button ~10 seconds while router is on.
2-Reset from the admin tab in the gui
3-Telnet/SSH in to the CLI and issue: nvram erase && reboot _________________ FORUM RULES
You first will need to reset the router back to factory defaults before the update on the older build.
NVRAM mappings have changed several times and will spawn gremlins if you don't.
Once you've upgraded you need to do another factory reset again to clear any mapping issues.
Then set up your settings from scratch. You cannot load old settings or they will point to old nvram mappings and spawn gremlins.
Three ways to factory reset.
1-Hold reset button ~10 seconds while router is on.
2-Reset from the admin tab in the gui
3-Telnet/SSH in to the CLI and issue: nvram erase && reboot
dumb clarification, point 3 all in lowercase _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Please could i ask about the latter part of my query
Also does the router on r37495M or r45735 support usbip?
Looking to a add a usb to router to passthrough to my Unraid Server running a Linux VM
As a follow up is the any advantages moving from r37495M to r45735?
Also is r45735 stable or if not which is the latest stable one?
Joined: 21 Jan 2017 Posts: 1783 Location: Illinois Moderator
Posted: Sat Feb 13, 2021 1:52 Post subject:
I don't run anything on USB so I cannot comment.
The last really good build to run would be 44715, but may or may not fully work with what you want to accomplish with your usb.
Kong builds are too old now to keep recommending as there have been several significant patches to security made since 2019. It's always best to run the newest build to assure you don't have any things exposed. If that kind of stuff doesn't worry you, there are plenty of people on here that use builds from several years ago and don't worry... _________________ FORUM RULES
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Sat Feb 13, 2021 2:23 Post subject:
thorrrr wrote:
Also does the router on r37495M or r45735 support usbip?
What is the output of lsmod on r37495M?
If the required kernel module(s) aren't in /lib/modules/$(KERNELVERSION), then it won't support it without some magic voodoo. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Hi
Cheers for the follow up my main reason to not keeping it up to date was having to re-enter settings every time.
But I think somebody stated versions after mine allowed to backup settings and reimport to new version, is that correct?
HI cheers for that, going through it now professionally written. As the author would you know if ver 44715 support usbip?
Also looking at the first bit of advice i am being told to do 2 factory resets! If this is correct do i have start with a first flash again then do 44715?
I am going from v3.0-r37495M kongat to the recommended 44715
Does this mean 4 flashes?
"You first will need to reset the router back to factory defaults before the update on the older build.
Once you've upgraded you need to do another factory reset again to clear any mapping issues."
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Sat Feb 13, 2021 13:36 Post subject:
Either TFTP the .img or webflash / CLI flash the webflash.bin and be done with it. Reset to defaults and reconfigure from scratch if you run into any issues.
I guess i need to break out my R7800 and flash this one and check to see if it supports usbip, since everything I've said so far has been moot, including this post, most likely. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net