Posted: Sat Feb 04, 2023 17:00 Post subject: New Build - 02/04/2023 - r51576
Welcome to Broadcom r51576 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Sat Feb 04, 2023 19:51 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r51576 std (02/04/23) Kernel: Linux 4.4.302-st28 #8600 SMP Sat Feb 4 03:35:49 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 01-29-2023-r51530 Status: Working so far, much better than last build. 5Ghz power output low for some reason. Still testing. wl: 14E4:4360 Overclock (STOCK FOR NOW!): 1000,800 (HIGHER RAM CLOCKS THAN STOCK 800 DON'T APPEAR TO ACTUALLY DO ANYTHING!) Temperatures: CPU 54.7 °C / WL0 48.5 °C / WL1 49.7 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Joined: 01 Dec 2021 Posts: 289 Location: Maryland, United States
Posted: Sat Feb 04, 2023 21:02 Post subject:
Router/Version: Netgear R7000P
Firmware Version: DD-WRT v3.0-r51576 std (02/04/23)
Kernel Version: Linux 4.4.302-st28 #8606 SMP Sat Feb 4 04:37:05 +06 2023 armv7l
Previous/Reset: r51530 / No Reset
Mode/Status: Gateway / Working
Issues/Errors : None
Shortcut Forwarding Engine:SFE
Flow Acceleration: CFF and FA
With Verizon FiOS 300/300 wired and wireless speed is to specifications and I obtain IPv6 LAN and WAN
With Comcast Gigabyte service, CTF does not increase faster than SFE with this build. The last build, with CTF as the shortcut forwarding engine, I could obtain the high to mid 600 Mbps. Now with this build it is the mid 400 Mbps. I can only obtain a WAN IPv6 address with a firewall modification, but no LAN address. Wireless speed is good in the mid 600 Mbps.
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=333513
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Sun Feb 05, 2023 7:24 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r51576M Community Build (02/04/23)
Kernel Version: Linux 4.4.302-st28 #1 SMP Sat Feb 4 09:30:41 CET 2023 armv7l
Upgraded from: DD-WRT v3.0-r51506M Community Build (01/25/23)
Reset: No not this time
Status: Up and running for 24 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working. IPv6 working. SmartDNS working with DoT.
OpenVPN server working.
WireGuard server working with 8 clients (phones, Windows and two other routers for site-to-site setup).
mDNS/Avahi working.
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Sun Feb 05, 2023 7:26 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r51576M Community Build (02/04/23)
Kernel Version: Linux 4.4.302-st28 #1 SMP Sat Feb 4 09:30:41 CET 2023 armv7l
Upgraded from DD-WRT v3.0-r51440M Community Build (01/19/23) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: No not this time.
Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
WireGuard client running with PBR.
OpenVPN client with PBR running.
IPv6 working.
NVRAM size 55K (NVRAM size should not be a problem with the Xvortex CFE)
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sun Feb 05, 2023 9:31 Post subject: DD-WRT BS build 51576 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r51576 std (02/04/23)
Kernel: Linux 4.4.302-st28 #8604 Sat Feb 4 04:18:26 +06 2023 armv7l
Previous: DD-WRT v3.0-r51275 std (01/09/23)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
Not 24/7; Not using CTF, FA, STP, IPv6, VPN, VAP;
USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
WAN DNS disabled; DDNS (no-ip.com) OK
DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
Entware core (CPU: armv71) installed without problem
}
Reset: No RESET during firmware upgrade
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2023/02-04-2023-r51576/asus-rt-n18u/
Summary
Everything working. Everything still working after cold boot.
Code:
Speedtest by Ookla
Server: SmarTone - Hong Kong (id: 35791)
ISP: Hong Kong Broadband Network
Idle Latency: 1.79 ms (jitter: 0.04ms, low: 1.73ms, high: 1.87ms)
Download: 94.25 Mbps (data used: 72.4 MB)
11.15 ms (jitter: 21.41ms, low: 8.36ms, high: 238.28ms)
Upload: 93.68 Mbps (data used: 42.2 MB)
11.41 ms (jitter: 2.53ms, low: 5.09ms, high: 16.19ms)
Packet Loss: 0.0%
Result URL: https://www.speedtest.net/result/c/f14011e9-f53b-4f27-bf4b-8c74856e21ab
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 09 Feb 2008 Posts: 54 Location: Melbourne, Australia
Posted: Mon Feb 06, 2023 3:13 Post subject: r51576 on Archer C9 V1.0
Router/Version: TP-Link Archer C9 V1.0
Firmware: DD-WRT v3.0-r51576 std (02/04/23)
Kernel: Linux 4.4.302-st28 #8602 SMP Sat Feb 4 04:03:50 +06 2023 armv7l
Previous: DD-WRT v3.0-r44715 std (03/11/20)
Update Method: webflash
Mode/Status: Router/OK
Reset: Yes
Setup Using: 2.4 GHz as STATION BRIDGE
Issues/Errors: Will NOT CONNECT using wl0 as a Station Bridge. Also important, during configuration, after 3 or 4 SAVE's of config, before APPLY SETTINGS, router systematically freezes and needs hard reset.
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Mon Feb 06, 2023 11:05 Post subject: Re: r51576 on Archer C9 V1.0
eladb wrote:
Router/Version: TP-Link Archer C9 V1.0
Firmware: DD-WRT v3.0-r51576 std (02/04/23)
Kernel: Linux 4.4.302-st28 #8602 SMP Sat Feb 4 04:03:50 +06 2023 armv7l
Previous: DD-WRT v3.0-r44715 std (03/11/20)
Update Method: webflash
Mode/Status: Router/OK
Reset: Yes
Setup Using: 2.4 GHz as STATION BRIDGE
Issues/Errors: Will NOT CONNECT using wl0 as a Station Bridge. Also important, during configuration, after 3 or 4 SAVE's of config, before APPLY SETTINGS, router systematically freezes and needs hard reset.
Coming from such an old build you need a reset to default after upgrading and you have to put settings in manually, never restore from a backup (to a different build).
Attached my personal notes how I setup a station bridge maybe they are useful.
Router/Version: Asus RT-3100
File/Kernel: asus-rt-3100.trx/Linux 4.4.302-st28 #8585 SMP Sun Jan 29 06:03:49 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r51530 std (01/29/23)/No
Mode/Status: NAT,CTF;AP 2/5GHz,Mixed Mode,WPA2;Wireguard Client Site-Site;
No DHCP,DNS;
Issues/Errors:
After upgrading to 51576, 5 GHz became unreliable and never showed more than 400 Mbps TX rate (1083 RX Rate). Reverting brought back higher 1083 TX & RX rates. I also noticed disconnects on Android phone with 51576.
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Mon Feb 06, 2023 11:58 Post subject:
PeteSL wrote:
Router/Version: Asus RT-3100
File/Kernel: asus-rt-3100.trx/Linux 4.4.302-st28 #8585 SMP Sun Jan 29 06:03:49 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r51530 std (01/29/23)/No
Mode/Status: NAT,CTF;AP 2/5GHz,Mixed Mode,WPA2;Wireguard Client Site-Site;
No DHCP,DNS;
Issues/Errors:
After upgrading to 51576, 5 GHz became unreliable and never showed more than 400 Mbps TX rate (1083 RX Rate). Reverting brought back higher 1083 TX & RX rates. I also noticed disconnects on Android phone with 51576.
