Posted: Tue Apr 26, 2022 9:15 Post subject: New Build - 04/26/2022 - r48741
Welcome to Atheros r48741 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Linksys EA8500...main gateway
DD-WRT v3.0-r48741 std (04/26/22)
Linux 4.9.311 #899 SMP Mon Apr 25 01:17:51 +07 2022 armv7l
GUI install over r48727
static DHCP
VLAN
unbound
local DNS
OVPN server
port forwards
samba shares
HFSC CAKE
worky very good
uptime ---> 9:42
#
Netgear WNDR3700 V4
DD-WRT v3.0-r48741 std (04/26/22)
Linux 3.18.140-d6 #141153 Tue Apr 26 09:53:33 +07 2022 mips
scp 'firmware.bin' to /tmp over r48727
used as switch - OVPN server - samba share
all worky good
uptime ---> 5:16
---
EDIT:
yeahuh all radios are also working nicely
moto edge plus conneced to EA8500
Last edited by mrjcd on Tue Apr 26, 2022 12:36; edited 1 time in total
Joined: 18 Mar 2014 Posts: 12922 Location: Netherlands
Posted: Tue Apr 26, 2022 9:33 Post subject:
Router Model: Linksys EA8500
Firmware Version: DD-WRT v3.0-r48741M Community Build by EGC (04/26/22)
Upgraded from: DD-WRT v3.0-r48607M Community Build by EGC (04/09/22)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working.
Posted: Tue Apr 26, 2022 10:10 Post subject: 48741
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r48741 std (04/26/22)
Kernel Version Linux 4.9.311 #625 SMP Thu Apr 21 20:27:43 +07 2022 armv7l
Current Time Tue, 26 Apr 2022 04:05:50
Uptime 2 min
Reset: no
GUI over 48646
Issues: not so far
Web pages seem to load quicker.
plz forgive me, im not so observant, but was Avahi included in the previous build 48646 for 1043v2...??
couse i can see it now as an option at the services menu... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Tue Apr 26, 2022 19:45; edited 1 time in total
Joined: 18 Mar 2014 Posts: 12922 Location: Netherlands
Posted: Tue Apr 26, 2022 10:21 Post subject:
It is a configurable option, actually two, the smaller variant only has the avahi-daemon, the larger variant has also the avahi-utils (avahi-browse, avahi-publish etc).
As we do not know the config files used we do not know if and what is present.
Probably it was also available in the previous build but for new settings to show up you usually have to refresh the browsers cache
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Tue Apr 26, 2022 11:18 Post subject:
egc wrote:
It is a configurable option, actually two, the smaller variant only has the avahi-daemon, the larger variant has also the avahi-utils (avahi-browse, avahi-publish etc).
As we do not know the config files used we do not know if and what is present.
Probably it was also available in the previous build but for new settings to show up you usually have to refresh the browsers cache
yep when i have time off im following it...(mDNS/Avahi),but probb i never looked at it on 1043v2, as i had a look n'test on R7800 and i thought it wont be included...on 8MB builds...
I'm just too busy and full of work and very likely not that observant ATM...thanks for the good work EGC... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Errors: WiFi LED'S constant flashing even when Clients are not connected.
*************
Additional info: I reloaded r48741 with same result of Led's flashing. Rolled back to r48646 and resolved flashing lights back to normal. I had no other issues with r48741 other than the LED's.
Last edited by kalrez on Tue Apr 26, 2022 17:20; edited 1 time in total
DIR-825B2
FW r48741 installed over FW r48646 via Firefox; seems to work properly; except WIFI-LEDs are flashing permanently even after additional reboot. Back to FW r48646 everything is fine.