egc DD-WRT Guru
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
|
Posted: Mon Jan 11, 2021 10:31 Post subject: Static Routing |
|
Build 45385 has an upgraded Static route page (Setup/Advanced Routing) with the ability to create extra tables and set rules.
The big news however is that BS backported ip rules from K4.17 and higher (quite an accomplishment) so we now have the full range of ip rules available to play with.
I wrote a little primer to demonstrate some capabilities, see attached document (only available if you are logged in)
This static routing can also be used in cases where you are using a VPN (WireGuard or OpenVPN) and the built-in Policy Based routing capabilities are not sufficient for your routing needs _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 |
|