Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Mon Mar 18, 2024 11:49 Post subject:
yep you are right, it would be very sketchy...as google has a tons of IP's to use the source based routing...and i had a wrong impression your problem could be solved via IPset rules...but at the moment i cannot experiment due to a time factor..but not in my favour _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
but in Source Routing (PBR) You can only bypass clients and not web addresses 🤔
That is incorrect.
DDWRT OpenVPN Client setup guide v23.pdf wrote:
Destination Based
If you primarily want to use the VPN but have a selected destination, e.g. a Domain/URL, which you want to route via the Wan you can enter in the OpenVPN Additional Config:
route ipleak.net 255.255.255.255 net_gateway #use vpn_gateway to route via the VPN
Now all traffic for this website, regardless of the source, will be routed via the WAN
You might also want to have the DNS query for this domain routed via the WAN which is explained in DDWRT DNS
and VPN guide
There is more about that in the guide , you should read it carefully.
but in Source Routing (PBR) You can only bypass clients and not web addresses 🤔
That is incorrect.
DDWRT OpenVPN Client setup guide v23.pdf wrote:
Destination Based
If you primarily want to use the VPN but have a selected destination, e.g. a Domain/URL, which you want to route via the Wan you can enter in the OpenVPN Additional Config:
route ipleak.net 255.255.255.255 net_gateway #use vpn_gateway to route via the VPN
Now all traffic for this website, regardless of the source, will be routed via the WAN
You might also want to have the DNS query for this domain routed via the WAN which is explained in DDWRT DNS
and VPN guide
There is more about that in the guide , you should read it carefully.
BTW: VPN questions belong in the Advanced Networking subforum Not General Questions.
thx for reply, can you tell me the command to route google.com?
