SMARTDNS Guide

Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking
Goto page Previous  1, 2, 3 ... 18, 19, 20
View previous topic :: View next topic  
Author Message
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12921
Location: Netherlands
PostPosted: Sat Feb 24, 2024 16:32    Post subject: Reply with quote
fe80 adress is what the client gives itself like a 169.254.x.x for ipv4.

The router can also have an fe80 address if the ipv6 module is loaded.
This can be the case if you use e.g. wireguard which does not run without ipv6 module. This will happen even if you have ipv6 disabled
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top View user's profile Send private message
Sponsor
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 260
Location: United States
PostPosted: Sat Feb 24, 2024 16:54    Post subject: Reply with quote
thank you
Back to top View user's profile Send private message
x53sv
DD-WRT Novice


Joined: 26 May 2018
Posts: 20
PostPosted: Sun Mar 03, 2024 1:13    Post subject: SmartDNS broke yesterday - must've had it set up wrong. Reply with quote
Hello.

I need help. I need current instructions, since the guide in this forum is from 4 years ago, It's not accurate from what I've seen. Or I could be wrong.

So I had SmartDNS running for months until it all of a sudden stopped while I was out of town. I run DNSMASQ for my local DNS. I have a jffs usb drive mounted, where my dnsmasq and hosts entries are located.

Code:
I am running Firmware: DD-WRT v3.0-r54604 std (12/26/23). My ISP is Xfinity. I have no issues using regular DNS which is overridden to 8.8.8.8, 8.8.4.4 and 1.1.1.1.

Code:

My DHCP network is 192.168.10.0 and my router is obviously 192.168.10.1.


I have a number of secondary wifi routers in order to increase bandwidth for different devices (connnected house by only through manual operations - no magic). I also have a number of bridges and routes and port-forwarding settings but these should not in theory conflict. All VPNs on DDWRT are disabled.

I would like to use only the hosts below plus my DNSMASQ. I had to reset my DHCP and turn off my SmartDNS to get back on the internet and now I want to set up smartDNS correctly.

Please help me with the most current settings to use. Feel free to ask any additional questions. I will post any additional details. I have no way to debug SMARTDNS since I am running the default version that came with my DD-WRT but I'm willing to experiment if required and if the first attempt to setup SmartDNS fails. My thanks in advance.

Here are the servers/settings that I did manage to save. TBH, I collected them from one of these forums. As you can see, I only picked the privacy enhance no logging servers. Or at least that was the intent.

Please help me configure:
Code:
DNSMASQ
SmartDNS

So that they can run peacefully together like they were before.

Code:
server-tls 1.1.1.1:853 -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com
server-tls 1.0.0.1:853 -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com
server-tls 9.9.9.9:853 -host-name dns.quad9.net -tls-host-verify dns.quad9.net
server-https https://1.1.1.1/dns-query -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com
server-https https://1.0.0.1/dns-query -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com
server-https https://9.9.9.9/dns-query -host-name dns.quad9.net -tls-host-verify dns.quad9.net
server-tls 8.8.8.8:853 -host-name: dns.google.com -tls-host-verify dns.google/dns-query
server-tls 8.8.4.4:853 -host-name: dns.google.com -tls-host-verify dns.google/dns-query
server-https https://8.8.8.8/dns-query -host-name dns.google.com -tls-host-verify dns.google/dns-query
server-https https://8.8.4.4/dns-query -host-name dns.google.com -tls-host-verify dns.google/dns-query
[/code]
Back to top View user's profile Send private message
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6447
Location: UK, London, just across the river..
PostPosted: Sun Mar 03, 2024 8:11    Post subject: Reply with quote
all you need Razz


(keep DNSmasq enabled)..!!

good idea to update to a newer firmware as, DNSmasq and SmartDNS ware recently updated...!!
_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Back to top View user's profile Send private message
Goto page Previous  1, 2, 3 ... 18, 19, 20 Display posts from previous:    Page 20 of 20
Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum