Posted: Sat Jan 27, 2024 0:57 Post subject: R7000 Bricked with ping and serial TTL connection
Hey guys,
Im trying to fix this router and it is just not responding to nmpr and the netgear version of it. I cannot ctr+c nor esc into CFE/interrupt the bootprocess
Any Ideas?
This is the output
C:\Users\marti\Desktop\Netgear>nmrpflash.exe -a 192.168.1.1 -i net4 -f R7000-V1.0.11.136_10.2.120.chk -v
Advertising NMRP server on net4 ... \
No response after 60 seconds. Bailing out.
Request timed out.
Reply from 192.168.1.10: Destination host unreachable.
Reply from 192.168.1.1: bytes=32 time=2292ms TTL=100
Reply from 192.168.1.1: bytes=32 time=11ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time=1ms TTL=100
Reply from 192.168.1.1: bytes=32 time=18ms TTL=10
CFE for Foxconn Router R7000 version: v1.0.22
Build Date: Wed Mar 19 11:14:20 CST 2014
Init Arena
Init Devs.
Boot up from NAND flash...
Bootcode Boot partition size = 524288(0x80000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.1 (r407936)
et1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.1 (r407936)
CPU type 0x0: 1000MHz
Tot mem: 262144 KBytes
Device eth0: hwaddr B0-7F-B9-9B-5C-A9, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
load default!
Digital core power voltage set to 1.0V
Decompressing...done
Digital core power voltage set to 1.0V
CFE for Foxconn Router R7000 version: v1.0.22
Build Date: Wed Mar 19 11:14:20 CST 2014
Init Arena
Init Devs.
Boot up from NAND flash...
Bootcode Boot partition size = 524288(0x80000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.1 (r407936)
et1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.1 (r407936)
CPU type 0x0: 1000MHz
Tot mem: 262144 KBytes
Device eth0: hwaddr B0-7F-B9-9B-5A-A3, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
load default!
Digital core power voltage set to 1.0V
Decompressing...done
Digital core power voltage set to 1.0V
SHMOO VER 1.13
PKID07DC06011801080000000000001A103F01000000
S300001B7
00001200
RDLYW0 00000004
RDENW0 00000033
RDQSW0
0000000000111111111122222222223333333333444444444455555555556666
(More of this)
PW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 +++++++++++++++++++++++++X++++++++++++++++++++++++--------------
(More of this)
WRDQW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ++++++++++++++++++++++X++++++++++++++++++++++------++++++++++++-
01 (More of this)