Posted: Sun May 07, 2023 8:02 Post subject: wa901ndv4 bricked
i have that wa901ndv4 bricked in closed now i will try to unbrick, all leds are blinking again and again,i downloaded tftpd64.exe seted static ip 192.168.0.66 gateway 192.168.0.1 conncted with utp on pc and wa , setted tftpd like
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Sun May 07, 2023 8:28 Post subject:
usually tftp works..you can see what file is asking for in the tftp console..
sometimes you need to set anticipation window to 1024 or use a switch between the PC and the router
also disconnect from internet and turn off any antivirus and firewall as those may interfere
or just add the tftp program in your firewall permitted programs..WIN 10 and W11 may not be very
supportive with TFTP...i always use win 7 ... or linux
to be honest, you have to find your own way how to do it, lots of info around, check in google or youtube... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
it was started ok but in start am wrong i forgot that my windows isnt show extensions after dot so am renamed .bin.bin and i had two _ characters
i now seted same but 2 3 hours wont pool
these was good chanse
Code:
Connection received from 192.168.1.66 on port 62963 [07/05 12:18:19.080]
Write request for file <C:\Users\WINDOWS7\Desktop\tftpd32.464\wa901ndv4__tp_recovery.bin.bin>. Mode octet [07/05 12:18:19.080]
File <C:\Users\WINDOWS7\Desktop\tftpd32.464\wa901ndv4__tp_recovery.bin.bin> : error 123 in system call CreateFile The filename, directory name, or volume label syntax is incorrect. [07/05 12:18:19.096]
Which hardware region is your router? EU? Links are http. https copy and paste address bar.
Below all have boot (loader) in the file name. The US file in OP does not have a boot loader.
i did it i unbrick wa901nd v4 with first fw you posted named wa901ndv4_tp_recovery.bin
Code:
Connection received from 192.168.0.86 on port 2859 [08/05 06:53:32.194]
Read request for file <wa901ndv4_tp_recovery.bin>. Mode octet [08/05 06:53:32.205]
Using local port 62134 [08/05 06:53:32.205]
<wa901ndv4_tp_recovery.bin>: sent 7938 blks, 4063744 bytes in 1 s. 0 blk resent [08/05 06:53:33.934]
Last edited by slowmotionscene on Mon May 08, 2023 7:44; edited 1 time in total
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Mon May 08, 2023 5:30 Post subject:
How exactly was this device "bricked". Long story short, there was a glitch in many builds (for the V2), and there was a method to flash from stock to DD-WRT and downgrade for it to work properly. But as of 47033, flashing factory-to-ddwrt file from stock is good to go with proper configuration and you should be able to flash to 52330 from there as I have a V2 sitting within 5 feet of me running that build
Good thing wifi is boosted to 28 db , bad lan port dont work
i hope someone will fix lan port , do you need some log or something to research error with lan ? i see how i can help out if is posibile.
Code:
Router Information
System
Router NameDD-WRT
Router ModelTP-Link TL-WA901ND v4
Firmware VersionDD-WRT v3.0-r52330 std (04/14/23)
Kernel VersionLinux 3.18.140-d6 #169452 Fri Apr 14 15:48:31 +06 2023 mips
MAC Address18:A6:F7:CC:CB:AC
Hostname
WAN Domain Name
LAN Domain Name
Current TimeNot Available
Uptime5 min
System Details
CPU ModelAtheros TP9343 ver 1 rev 1.0 (0x0150)
CPU Cores1
CPU Features
MIPS32r1 MIPS32r2 MIPS16
CPU Clock750 MHz
Load Average
5%0.05, 0.07, 0.02
Memory - Available / Total
Total
89%29288 KiB / 32768 KiB
Free
31%9148 KiB / 29288 KiB
Used
69%20140 KiB / 29288 KiB
Buffers
12%2376 KiB / 20140 KiB
Cached
30%6016 KiB / 20140 KiB
Active
30%5952 KiB / 20140 KiB
Inactive
17%3496 KiB / 20140 KiB
NVRAM / CIFS / JFFS2 Usage
NVRAM11 KiB / 64 KiB
Network
Maximum IP Connections4096
Active IP Connections
4%167
now is sticked with that build and i cant change wf via web and lan dont work
good i get back wa to stock via tftpd
Code:
Connection received from 192.168.0.86 on port 2877 [08/05 11:07:11.547]
Read request for file <wa901ndv4_tp_recovery.bin>. Mode octet [08/05 11:07:11.562]
Using local port 64330 [08/05 11:07:11.562]
<wa901ndv4_tp_recovery.bin>: sent 7938 blks, 4063744 bytes in 2 s. 0 blk resent [08/05 11:07:13.316]
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Mon May 08, 2023 9:29 Post subject:
as you know how to unbrick via TFTP (this is the first step everyone, should know when installing any non stock or even stock firmware) now you can try 52549 as its stable ...so far..
for your samba usb issues...as DDWRT is linux based, try using linux format like ext2 or 3 or 4
the problem is your 1043v1 has very slow CPU and there it gets very slow and buggy with other performance especially when using NAS..
the stock firmware is using hardware offloading chip (im not sure about your v1 but v2 has it) and its performance with stock firmware is way better...so stick with stock firmware and miss lots of security updates and ect....this is the reason i use DDWRT firmware as its very quick updated when is about security and has lots of other useful stuff..
p.s. i told you that for tftf flash, you must find the correct name required, and you can see it in the tftp console...so now you know tftp procedure...you have all the freedom
to fix LAN ports not working try to add this script in administration >commands>save start up script
sleep 10
swconfig dev switch0 set reset 1
swconfig dev switch0 set enable_vlan 1
swconfig dev eth0 set enable_vlan 1
swconfig dev switch0 set apply
swconfig dev eth0 set apply _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913