Posted: Wed Nov 25, 2015 6:24 Post subject: TP-Link TL-WA901ND v4 DD-WRT support
This thread is intended for the discussion of DD-WRT support for TP-Link TL-WA901ND v4.
Specs of v4 hardware:
CPU Atheros TP9343 (QCA9561 variant) 750MHz
I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR941ND v6, so it will flash on a TL-WA901ND v4 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29739 webflash build for TL-WR941ND v6.
Note: The older modified build 28211 that I sent to user softjad (discussed in some of the following posts) was based on WA901ND v3, but wasn't working properly and you should not use that one !
Disclaimer: I haven't tested the attached build myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.
You must be logged in to be able to download the attachment. _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
where could I find/get the modified firmware? I don't need the WAN/LAN port, just wireless. I would be very thankful, currently I have to restart this repeater a few times a day with the stock firmware.
Tested today a v3 mod that user KrypteX send to me, and everything works fine, except for the ethernet port.
if you set up as DHCP, interface never comes up.
If you set up Static IP, interface comes up in software, front ethernet light comes on, but no data is sent or received over the interface, so, ruting doesn't work.
another thing is wifi works well, but wifi frontlight not lit.
only light on is power, and ethernet if you set static ip.