Posted: Thu Feb 09, 2023 7:13 Post subject: New Build - 02/09/2023 - r51617
Welcome to Broadcom r51617 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Thu Feb 09, 2023 23:07 Post subject: Re: Netgear Nighthawk R7000
kernel-panic69 wrote:
twindragon6 wrote:
Anyone else having issues with incorrect NTP time? Come to think of it, I think it was wrong in the last build as well.
Screenshots to further explain the issue?
It gets time but the clock is wrong, set correctly for my area. I have tried different IP addresses, domain names and time zone settings. I'm also only using IPV4 if it matters any.
HOME Wired Multicast ISP 4K TV Network Router/Version: R7000
File/Kernel: DD-WRT v3.0-r51617 std (02/09/23)
Kernel Version: Linux 4.4.302-st28 #8644 SMP Thu Feb 9 05:39:42 +06 2023 armv7l
Previous/Reset: r51589 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,CTF,SSH,Syslog
Services Disabled: 2.4 & 5Ghz Radios,FA,QoS,ttraff,Telnet,NAS,Samba
Running for over 1 hour.
OffSite #1 Router/Version: R7000
File/Kernel: DD-WRT v3.0-r51617 std (02/09/23)
Kernel Version: Linux 4.4.302-st28 #8644 SMP Thu Feb 9 05:39:42 +06 2023 armv7l
Previous/Reset: r51140 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: 2.4 & 5Ghz Radios,CTF,DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: FA,QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Running for over 6 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Fri Feb 10, 2023 0:50 Post subject:
GMT-8 is UTC+8 and GMT+8 is UTC-8. Only thing to try is a hard reset and start fresh, reconfigure from scratch, if your browser cache has already been cleared or CTRL+F5 has been used. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
GMT-8 is UTC+8 and GMT+8 is UTC-8. Only thing to try is a hard reset and start fresh, reconfigure from scratch, if your browser cache has already been cleared or CTRL+F5 has been used.
I'll give it a shot, it might be a ghost in the shell situation.
Posted: Fri Feb 10, 2023 2:51 Post subject: Re: Netgear Nighthawk R7000
twindragon6 wrote:
mac913 wrote:
twindragon6 wrote:
Anyone else having issues with incorrect NTP time? Come to think of it, I think it was wrong in the last build as well.
My time is correct and using default servers.
Same issue... I did notice Dnsmasq going crazy but it could be due to not getting valid time.
I'm using "Canada/Pacific" it's the same time zone as yours, maybe give it a shot. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531