Author
Message
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Mon Dec 20, 2021 12:07 Post subject:
@Akore, I just tested USB/Samba and it worked without a problem.
Note you can only use the USB 1 port with the Xvortex CFE if I remember correctly
If you need assistance open a new thread in this forum
To get the best out of DDWRT and the forum read the forum guidelines full of helpful pointers:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top
Sponsor
Akore DD-WRT Novice Joined: 19 Dec 2021 Posts: 9
Posted: Mon Dec 20, 2021 13:50 Post subject:
egc wrote: @Akore, I just tested USB/Samba and it worked without a problem.
Note you can only use the USB 1 port with the Xvortex CFE if I remember correctly
If you need assistance open a new thread in this forum
To get the best out of DDWRT and the forum read the forum guidelines full of helpful pointers:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Ok, thanks for testing it. I definitely have it plugged into USB1 which is the 3.0 port. I will start a new thread about it. Thanks again for helping out.
Update... USB port 2 works! You got me thinking when you said only one of the ports worked so I tried the #2 port and sure enough I have access to the drive! Going to go back to standard CFE and see if they both work.
Thanks again for the help!
Back to top