Posted: Wed Jun 10, 2020 12:31 Post subject: New Build - 06/10/2020 - r43381
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Router: Netgear R7000
Firmware: 06/10/2020 -r43383
Previous: 06/02/2020 -r43324
Reset: No
uptime: about 45 minutes
Mode: AP/Gateway, acting as a second LAN on my network. is connected behind my new router TP-Link C4000 (AKA A20)
Also wanted to mention that this router was almost lost after a XWRT flash, and suffering a corrupted CFE. Happy to say, was able to restore it last night and seems to be working, at least good enough for a second / backup router.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Mode/Status: Gateway/AP/VPN/Port FWD/QOS
Reset: cli nvram erase <enter> nvram erase <enter>, (cycled power)
Issues/Errors: Did not place into production due to following issue: Unable to save firewall commands via gui Administration > Commands, paste command string in window, Save Firewall. Worked in previous r43334 and previous releases.
Firmware Version: DD-WRT v3.0-r43381 Community Build (06/10/20)
Kernel Version: Linux 4.4.226 #1 SMP Wed Jun 10 11:53:05 CEST 2020 armv7l
Upgraded from: DD-WRT v3.0-r43306 Community Build (06/01/20)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS working, WireGuard working.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Wed Jun 10, 2020 16:11 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43381_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 4.4.226 #1724 Wed Jun 10 14:42:06 +04 2020 mips
Mode: AP/USB
Previous: r43334
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-43381_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 4.4.226 #1724 Wed Jun 10 14:42:06 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: r43334
Reset?: N
Status: Working
Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43381_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 4.4.226 #1724 Wed Jun 10 14:42:06 +04 2020 mips
Mode: Gateway/USB
Previous: r43334
Reset?: N
Status: Working
Router/Version: Linksys WRT54G2v1
File: dd-wrt.v24_micro_generic.bin
Firmware: DD-WRT v3.0-r43381 micro (06/10/20)
Kernel: Linux 2.4.37 #60687 Wed Jun 10 07:12:36 +04 2020 mips
Mode: Gateway
Previous: N/A
Reset?: Y
Status: Working
Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 2.4.37 #60682 Wed Jun 10 07:05:11 +04 2020 mips
Mode: Gateway/USB/bwmon
Previous: r43334
Reset?: N
Status: Working
Joined: 18 Mar 2014 Posts: 12922 Location: Netherlands
Posted: Wed Jun 10, 2020 18:03 Post subject:
jptech wrote:
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Mode/Status: Gateway/AP/VPN/Port FWD/QOS
Reset: cli nvram erase <enter> nvram erase <enter>, (cycled power)
Issues/Errors: Did not place into production due to following issue: Unable to save firewall commands via gui Administration > Commands, paste command string in window, Save Firewall. Worked in previous r43334 and previous releases.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9 09:35:21 +04 2020 armv7l
Previous: r43334
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 2hrs 46mins
Temperatures: CPU 67.5 °C / WL0 47.0 °C / WL1 52.9 °C
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Wed Jun 10, 2020 20:16 Post subject: New Build - 06/10/2020 - r43381
Router/Version: Netgear WNR3500L v2
File/Kernel: Linux 4.4.226 #1708 Wed Jun 10 14:23:41 +04 2020 mips
Previous/Reset: Update from version Jun 4, 2020. Reboot only
Mode/Status: Internet gateway and WIFI AP
Issues/Errors: some warnings. Device is working
Uptime: 5h & 35mins
I'm update device with ssh from previously version. Router is working rather good.
Posted: Wed Jun 10, 2020 23:59 Post subject: RE: I think you have more problems time is also not set
RE: I think you have more problems time is also not set
Time was not set because I saw no point in placing this router into production due to the issue I reported. In other words I did not connect the WAN connection to my ISP.
No chance of getting the time from the NTP server without that connection.
I have multiple Netgear R7000's which allows me to upgrade, erase (twice), and configure it without disrupting my network. I then place the new release into service for testing outside the wife's work from home hours.
Thanks for bringing that up.
Last edited by jptech on Thu Jun 11, 2020 3:09; edited 1 time in total
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.226 #331 SMP Wed Jun 10 08:47:01 +04 2020 armv7l
Previous/Reset: r43334 / yes
Mode/Status: Gateway AP 2.4GHz 5GHz Unbound USB / working
Issues/Errors: no issues or errors. just a note. a sleep and unbound restart is needed in your start up script when using a usb. if not the default conf will be used. 2 works for me