Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer 2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.
Issues, observations, and/or workarounds reported: 1.Trendnet 81*DRU models are missing factory-to-flash 2.DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use:6246 3.WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) 4.K2.6 builds are broken since 38253(?) (GUI issues):6538 5.VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...
Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Tue Oct 15, 2019 13:00 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41328_NEWD-2_K3.x_mega_RT-N66U.trx
Kernel: Linux 3.10.108-d8 #306 Mon Oct 14 12:14:47 +04 2019 mips
Mode: AP w/USB
Previous: r41321
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-41328_NEWD-2_K3.x_mega.bin
Kernel: Linux 3.10.108-d8 #306 Mon Oct 14 12:14:47 +04 2019 mips
Mode: Router/OpenVPN client
Previous: r41321
Reset?: N
Status: Working
Flashed from gui. Syslogs clean. Up 2.5 hours. Wait to see if timer/rekey issue reappears as in previous versions.
Router: Netgear R7000P
Kernel: Linux 4.4.196 #113 SMP Tue Oct 15 07:04:36 +04 2019 armv7l
Mode: Gateway / AP / Unbound
Reset: No
Uptime: 2hrs
Status: all seems well
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41328 std (10/15/19)
Kernel: Linux 4.4.196 #108 SMP Mon Oct 14 08:35:38 +04 2019 armv7l
Previous: r41321
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 4hr 30min
Temperatures: CPU 68.6 °C / WL0 48.3 °C / WL1 54.0 °C
Posted: Tue Oct 15, 2019 23:36 Post subject: WNDR4500v2
Router/Version: WNDR4500v2
File: DD-WRT v3.0-r41328 giga (10/15/19)
Kernel: Linux 3.10.108-d8 #350 Tue Oct 15 11:53:02 +04 2019 mips
Mode: AP/Switch/DHCP Forwarder
Status: Working
Uptime: 14 min
Temps: WL0 42.7 °C / WL1 43.1 °C
The trial issue with the previous build 41321 has disappeared. This flash required no change in procedure and did not brick the router. Will test through the week or until next build.
Router/Version: Linksys E3200
Mode: Gateway / AP
Status: Erased Nvram after updating and so far everything seems fine. It's been up and running for a few hours but it doesn't get very much use.
One thing I have noticed is that the router says it's using a BCM5357 CPU but every other site that has info on this router says it's using a BCM47186B0 including the DDWrt wiki. This doesn't seem like an issue I just thought I'd point it out.
Router/Version: Linksys E4200 v1
File: DD-WRT v3.0-r41328 mega (10/15/19)
Kernel: Linux 3.10.108-d8 #336 Tue Oct 15 10:57:57 +04 2019 mips
Mode: AP
Status: No issues so far.
Uptime: 1 day, 7:36
Temperatures: WL0 55.0 °C / WL1 54.0 °C
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Sun Oct 20, 2019 10:06 Post subject:
Router Model: Linksys E2000 (converted N320)
Firmware Version: DD-WRT v3.0-r41328 (10/15/19)
Kernel Version: Linux 3.10.108-d8 #336 Tue Oct 15 10:57:57 +04 2019 mips
Upgraded: from DD-WRT v3.0-r39927 mega (06/03/19) with IE, Firefox seems flaky when updating
Reset: Yes, I had to, the WIF security settings were undefined, I did: nvram erase && reboot
Status: Up and running for 4 hours, basic setup as Gateway, static leases, Wifi working
Router: Asus RT-AC68U rev C1
Kernel: Linux 4.4.196 #113 SMP Tue Oct 15 07:04:36 +04 2019 armv7l
Mode: Gateway / AP
Reset: No, flashed from command line
Status: Seems to work quite well. _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Joined: 08 May 2018 Posts: 14247 Location: Texas, USA
Posted: Sun Oct 20, 2019 19:05 Post subject:
egc wrote:
Reset: Yes, I had to, the WIF security settings were undefined, I did: nvram erase && reboot
My last reset since my last brick was here: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1177489#1177489 <-- and I only did it to confirm the difference in numbers of used/free nvram between CLI/Serial and webUI, which the numbers ARE different. Outside of that, I haven't reset during upgrade process since my last brick, even during all of the QoS fixes where there were 'undefined' settings. I've pretty much determined that the only times it is necessary, and only applicable by device and who compiled the build is at initial flash and/or after a serial or tftp recovery. Outside of that, it's pointless unless something corrupted the nvram, in which case, it likely won't boot completely. The web page issue with settings can likely be solved by clearing cache, and/or F5/refresh page, or the infamous "save" and/or "apply" trick. I only have very random issues with Firefox ESR. Just my thoughts.
After an uptime of ~48h this AP lost the WAN-interface and connection (via eth) to the DSL-router for some unexplainable reason. The DSL-router was not available any more, it was not listed in 'Active Clients' (Status/LAN) on the AP (it usually is, same net). I was watching YT on a PC connected via eth to the AP, and eventually paused a video. At around that time or soon after WAN has vanished. Strange, never has happened before. I do not use QOS, SFE is off, firewall is off (except 'Filter Multicast'), it is my DHCP server. _________________ 3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xAsus RT-AC87U
1xAsus RT-AC88U
1xTP710
Router: Asus RT-AC68U rev A1 & C1
Kernel: Linux 4.4.196 #113 SMP Tue Oct 15 07:04:36 +04 2019 armv7l
Mode: Gateway / AP
Reset: No, flashed from command line
Status: Seems to work quite well.
_________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
