Posted: Fri Jan 12, 2024 19:23 Post subject: New Build - 01/12/2024 - r54905
Welcome to Atheros r54905 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router Model: TP-Link TL-WR1043ND v1.8
Firmware Version: DD-WRT v3.0-r54905 std (01/12/24)
Previous: DD-WRT v3.0-r54475 std (12/07/23)
File: tl-wr1043nd-webflash.bin
Kernel Version: Linux 3.10.108-d11 #150806 Fri Jan 12 05:48:48 +06 2024 mips
Mode: Gateway/Wireless Station (client)
Reset: None required
Status: OK
Uptime: ~10 hours
Issues/Errors: Nothing new to report. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Posted: Fri Jan 12, 2024 21:14 Post subject: New Build - 01/12/2024 - r54905
Netgear r7500v2 Ethernet lights 1 and 2 which i'm using would not come on at all though the pc did show it was still on gb connect. T rebooted several times still no lights and there seems to be connection issues spectrum.net website for several seconds. Return to previous firmware 1/2/24.
Linksys WRT160NL
DD-WRT v3.0-r54905 std (01/12/24)
Linux 3.10.108-d11 #150782 Fri Jan 12 04:54:10 +06 2024 mips
GUI install over r54652
WAP + OVPN server -- all good
#
Linksys E2100L
DD-WRT v3.0-r54905 std (01/12/24)
Linux 3.10.108-d11 #150786 Fri Jan 12 04:59:44 +06 2024 mips
GUI install over r54652
WAP + OVPN server -- all good
Netgear WNDR3700 V4
DD-WRT v3.0-r54905 std (01/12/24)
Linux 3.18.140-d6 #190589 Fri Jan 12 08:47:27 +06 2024 mips
scp install 'firmware.bin' over r54652
main router backup ---> seems all good
Clone WAN MAC
VLAN on 1 port + wlan0.1 + wlan1.1 via isolated br1
Router/Version: EA8500
File/Kernel: Who cares
Previous/Reset: r53562/auto reset x5
Mode/Status: Test unit
Issues/Errors: Same as always on k6.x
No surprise, but still not working on EA8500. DOH! Why do I keep trying these builds when I know they are not going to work? Can we PLEASE get a k4.9 build for this router? Version 6.x is obviously not going to work with this router without some serious work it seems. Let's bypass this transition. I don't care if we have a 6.x kernel for EA8500. What I DO care about is having an up-to-date router firmware and this is not working at all. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r54905 std / Linux 3.18.140-d6 #190547 Fri Jan 12 06:55:11 +06 2024 mips
Previous/Reset: r54682 / no
Mode/Status: AP wired and wireless / Up and running for 7:19 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Can we PLEASE get a k4.9 build for this router? Version 6.x is obviously not going to work with this router without some serious work it seems. Let's bypass this transition. I don't care if we have a 6.x kernel for EA8500. What I DO care about is having an up-to-date router firmware and this is not working at all.
Seconded. I'll keep using r53562 with my EA8500 until a) builds revert back to using k4.9 or b) builds with k6.1 in them see a dramatical improvement in compatibility.
