Posted: Sun Apr 02, 2023 5:46 Post subject: New Build - 04/02/2023 - r52217
Welcome to Marvell r52217 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r52217 std (04/02/23)
Kernel Version Linux 4.9.337 #3725 SMP Sun Apr 2 03:33:52 +07 2023 armv7l
Current Time Sun, 02 Apr 2023 13:57:31
Uptime 2:40
update-browser waterfox, I switched from partition from partition two with version v3.0-r52189 without saving the settings,the router stopped responding to ping until I rebooted it from the power button
connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation 1Gbps
IPv6 Type DHCPv6 with Prefix Delegation-On - Ok
Operating Mode Gateway/AP
Shortcut Forwarding Engine-On
Schedule Reboot-On,
Web Access Protocol - HTTPS,
SSH (public key)- ok
Port Forwarding - Ok,
USB - System Log -Ok
Schedule Reboot - At a Set Time - On[/color]
After configuring the settings, I rebooted the router every time!
Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36,Extension Channel UU, Short GI, Short Preamble, Single User Beamforming, Radio Scheduling, TX Power-30Bm ,TX Antenna Chains-1+2+3+4, RX Antenna Chains-1+2+3+4, Enable-WPA2 Personal-CCMP-128 (AES), Regulatory Domain Romania
Your log shows that ssh with key authentication worked first.
Code:
Apr 2 08:32:15 DD-WRT authpriv.info dropbear[3408]: Child connection from 192.168.15.77:50596
Apr 2 08:32:15 DD-WRT authpriv.notice dropbear[3408]: Pubkey auth succeeded for 'root' with ssh-rsa key from 192.168.15.77:50596
Nothing has changed at all, so you must have changed something yourself.
until this version I had no problems _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
Something does not match here.
Your log shows that you logged in with an RSA key, but the screenshot shows an ed25519 key.
So think again if you have not changed something.
I redid the installation on the first partition, I have linksys firmware and from there I switched to the ddwrt version, the router did not respond to the ping anymore, I left it like this for about 9 minutes, after which the ping returned by itself and hit the partition with ddwrt, strangely, I have never waited so long for writing ddwrt on wrt1900acs v2!
Authorized Keys work this after generating a new key with puttygen, maybe I don't know how to work with the one integrated in ddwrt, even the speed test seems ok now! _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
Authorized Keys work this after generating a new key with puttygen, maybe I don't know how to work with the one integrated in ddwrt, even the speed test seems ok now!
You can read about this on the help pages of the router.
Quote:
Key Handling
To generate a key, choose the desired keysize, then click the Generate Key button to begin. Click OK and be patient. After key generation has completed you can choose to download the private key in the default OpenSSH format by clicking the Download Private Key button. For further information on key usage click here.
Quote:
Key Handling
For PuTTY:
Convert the private key-file with PuttyGen as follows:
Conversions
Select Import key from menu then browse for directory where you saved the previusly downloaded id_rsa.ssh key and select it.
Click Save private key and enter e.g. id_rsa.ppk as a filename, your key is now ready to be used in PuTTY.
PuTTY key import:
Click SSH to expand options
Click Auth
Under Private key file for authentication, click the Browse... button then select the id_rsa.ppk you had previously converted and Save your PuTTY profile.
And please edit your first post, ssh definitely works
I tried different settings on the 5Ghz wifi, there are still disconnections _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
Issues/Errors: None, uptime approx 30 hrs. BTW, I've not had any problems with 5 GHz?? Streamed for approx 3 hrs last night on two different Roku's using 5 GHZ with no issues. Also, I don't recommend using WPA3 for the average user, only enabled as the only way to get our Moto phones to connect after they updated last year. Its working smoothly for me but . . maybe not for others??
I did notice my DL speed dropped about 30 MB (normal about 170 MBs) when tested using the Netflix app but no noticeable affect on stream quality.
Joined: 04 Aug 2018 Posts: 1447 Location: Appalachian mountains, USA
Posted: Mon Apr 03, 2023 15:01 Post subject:
oliver44 wrote:
I have linksys firmware and from there I switched to the ddwrt version, the router did not respond to the ping anymore
Greetings, Oliver... just wanted to remind readers who switch between partitions that the firmware in the two partitions share configuration memory. So if you switch from Linksys firmware in one partition to dd-wrt in the other partition, you absolutely must either reset and reconfigure or restore a backup made earlier in that dd-wrt build. Otherwise your nvram variables / GUI settings are effectively corrupted by whatever the Linksys firmware did with that configuration memory. The corruption could be subtle if dd-wrt and Linksys largely use different parts of that memory, or it could be obviously catastropic. _________________ 2x Netgear XR500 and 3x Linksys WRT1900ACSv2 on 53544: VLANs, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), 3 DNSCrypt providers via VPN.
I have linksys firmware and from there I switched to the ddwrt version, the router did not respond to the ping anymore
Greetings, Oliver... just wanted to remind readers who switch between partitions that the firmware in the two partitions share configuration memory. So if you switch from Linksys firmware in one partition to dd-wrt in the other partition, you absolutely must either reset and reconfigure or restore a backup made earlier in that dd-wrt build. Otherwise your nvram variables / GUI settings are effectively corrupted by whatever the Linksys firmware did with that configuration memory. The corruption could be subtle if dd-wrt and Linksys largely use different parts of that memory, or it could be obviously catastropic.
@SurprisedItWorks I have to come with a remark, I tried to install on wrt1900acs v2, openwrt and gargoyle and it does not create the problem related above and until recently everything was working well with ddwrt too...!
Of course, what you say is from experience, but honestly I noticed that ddwrt on my router worked better when I was doing the transit from the linksys software without using a backup for the settings I had previously, I restarted everything from the beginning all the settings manually...
Thank you for the advice! _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt