Posted: Mon Aug 29, 2022 4:49 Post subject: New Build - 08/29/2022 - r49976
Welcome to Atheros r49976 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router Model TP-Link TL-WR841ND v11
Firmware VersionDD-WRT v3.0-r49976 std (08/29/22)
Kernel Version Linux 3.18.140-d6 #151785 Mon Aug 29 06:19:31 +07 2022 mips
Updated via CLI from r49934
Reset: Yes
Status: Working OK as AP, HT40, Mixed
Issue: Switch config page doesn't look normal, see the screenshot. With r49934 was OK.
Router Model TP-Link TL-WR841ND v11
Firmware VersionDD-WRT v3.0-r49976 std (08/29/22)
Kernel Version Linux 3.18.140-d6 #151785 Mon Aug 29 06:19:31 +07 2022 mips
Updated via CLI from r49934
Reset: Yes
Status: Working OK as AP, HT40, Mixed
Issue: Switch config page doesn't look normal, see the screenshot. With r49934 was OK.
Same here on my EA8500...(and my Marvel WRT1900ACv1) _________________ ------------------------------------
Linksys WRT3200ACM DD-WRT r55819 (Gateway)
Linksys EA8500 OpenWrt-23.05.3 (Wired AP)
Netgear WNDR3700v4 DD-WRT r55819 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49976 std (08/29/22)
Kernel Version Linux 4.9.326 #645 SMP Sun Aug 28 02:33:01 +07 2022 armv7l
Current Time Mon, 29 Aug 2022 07:44:12
Uptime 2 min
GUI over 49934
Reset: no
Issues: Upgrade went fine.
Posted: Mon Aug 29, 2022 14:34 Post subject: WR841N, WR740N, Gl.iNetAR150
Noticed minor issue on WR841N, WR740N, Gl.iNetAR150 routers:
Update method: Web Upgrade
Router/Version: TP-LINK WR740Nv2, TP-LINK WR740Nv4, Gl.iNetAR150
File/Kernel: DD-WRT v3.0-r49976 std (08/29/22)
Previous/Reset: DD-WRT v3.0-r49934 std (08/28/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: Status->Wireless page, section Wireless Nodes/Access Point is displayed nothing since r49866. Actually there are three releases so far: r49866, r49934 and latest r49976. The last release that was able to display correctly the connected clients was r49838.
Router Model: TP-Link TL-WR1043ND v1.8
Firmware Version: DD-WRT v3.0-r49976 std (08/29/22)
Previous: DD-WRT v3.0-r49934 std (08/28/22))
File: tl-wr1043nd-webflash.bin
Kernel Version: Linux 3.10.108-d11 #115506 Mon Aug 29 05:28:22 +07 2022 mips
Mode: Gateway/AP
Reset: None required
Status: OK
Uptime: ~12h
Issues/Errors: There is no switch config tab, whatsoever. Something must've gotten broken in all the refactoring and other bits since the last release. Otherwise, the webUI is really snappy and stable 🤘💥🔥✔👍
Jovan wrote:
Router Model TP-Link TL-WR841ND v11
Issue: Switch config page doesn't look normal, see the screenshot. With r49934 was OK.
nickant wrote:
Same here on my EA8500...(and my Marvel WRT1900ACv1)
Router/Version: Netgear R9000 Nighthawk X10
Issues/Errors: Switch Config tab broken as described by others
LizardWizard wrote:
Router: Netgear R7800
Errors: Switch Config page seems to be broken as others have reported.
_________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Mon Aug 29, 2022 17:53 Post subject:
Patch submitted to fix, it happens, the culprit is a missing space afaik which was removed inadvertently by some mystery, the gods of copy and paste and rushing dot go well together.
Netgear WNDR3700 V4
DD-WRT v3.0-r49976 std (08/29/22)
Linux 3.18.140-d6 #151827 Mon Aug 29 07:43:00 +07 2022 mips
scp 'firmware.bin' install over r49934
it worky
WNDR3700V4 used as main I just stuck in to replace EA8500
scp 'firmware.bin' install over r49681
local DNS
static DHCP
VLAN on wired port 1 (closest port to WAN on this stupid Netfear unit) with wlan0.1 & wlan1.1 via br1 on isolated net.
QOS HFSC FQ_CODEL
samba share 32GB ext4 flash
all these settings still worky just fine ...like they used to on the EA8500
this is my main BU unit ...figure 'bout time I reset & redo the EA8500
gonna have to reconfig some stuff since yous people had BS change the damnol switch
BTW it worked perfectly fine the way it was.
Maybe I tinker with it afterlater sometimes
this is my main BU unit ...figure 'bout time I reset & redo the EA8500
gonna have to reconfig some stuff since yous people had BS change the damnol switch
BTW it worked perfectly fine the way it was.
Maybe I tinker with it afterlater sometimes
Good luck with that. I have been trying now for a few days to reconfigure vlans on a spare EA8500. The last release seems to nullify any working vlans on the EA8500. Make one change, you can no longer get into it (via GUI). This one I cannot tell, since the Switch Config page is a mess. Next release may be the tail tell signs. Please post your results. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.