Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Sat Nov 20, 2021 21:18 Post subject: [SOLVED] Netgear R9000 turns LEDs on and off
Hi friends!
For a long time my network has been without problems but now suddenly and without any change or previous problem my main netgear R9000 router has stopped working turning off and on the LEDs and without giving access to it. it looks like brick it
video
I have turned it off for 10sec and nothing, then unplug everything and turn it off for 2 hours and nothing ...
What do you think it could be?
help
edited: by the way if you ask whats is my router ► MAINROUTER:
NETGEAR NIGTHAWK R9000 --> DD-WRT v3.0-r47510 std
WAN, Gateway, DHCP, Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, QoS, 1gbps Wired NAS Server, Entware: Zerotier, Mc _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Sat Nov 20, 2021 23:27 Post subject:
I will try to do a first reset or hard reset 30-30-30 and I'll let you know what happened _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Sun Nov 21, 2021 1:45 Post subject:
You don't 30-30-30 this device; you will put it in TFTP recovery mode or brick it. If you can't log in via telnet or ssh and do an 'nvram erase && reboot', all you *should* need to do is press the reset for ~10 sec with it booted up, if it even boots up. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Mon Nov 22, 2021 1:43 Post subject:
I was on a trip but I will arrive tomorrow and I will put into practice everything they have told me in addition to other things that I read and I will give news _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Mon Nov 22, 2021 16:56 Post subject:
kernel-panic69 wrote:
You don't 30-30-30 this device; you will put it in TFTP recovery mode or brick it. If you can't log in via telnet or ssh and do an 'nvram erase && reboot', all you *should* need to do is press the reset for ~10 sec with it booted up, if it even boots up.
this 10sec dont worked at all still the same _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Mon Nov 22, 2021 16:57 Post subject:
I connect to the wired router and it does not recognize on the pc that it is connected _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Mon Nov 22, 2021 16:59 Post subject:
Alozaros wrote:
smells like Power Supply Issue... check your PSU..
if not, try TFTP than, unless its not hardware failure...last resort serial recovery...
how can i try the TFTP and the other serial thing? _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Mon Nov 22, 2021 17:04 Post subject:
the power adapter seems fine, well... i never unplug it or tamper with anything ... open the router _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
but i dont know what firmware file do i have to got _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
to do this, you must first be able to set the router to TFTP mode
normally this is very easy:
you turn off the router and press the reset button and keep it pressed.
then turn on the router and watch the power LED
After the power LED is red, it will start blinking white.
then you can release the reset button
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Mon Nov 22, 2021 17:58 Post subject:
ho1Aetoo wrote:
to do this, you must first be able to set the router to TFTP mode
normally this is very easy:
you turn off the router and press the reset button and keep it pressed.
then turn on the router and watch the power LED
After the power LED is red, it will start blinking white.
then you can release the reset button
but this is certainly all described in your link.
It does not say anything about the reset button, but I will try the 2 ways, but I do not know which firmware file I should use
I took advantage of disassembling it and I have seen some marks on the back, in the photo you can see it, so I will clean it a little _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Mon Nov 22, 2021 21:22 Post subject:
I tried to do the TFTP but they say that the power led should turn red or orange, but it does not because since my router turns on the leds turn on and off as in the image
On the page it says that it must be turned off and connected by cable and when turning on the router wait until the power led changes from orange to white and press put on the TFTP and the friend ho1Aetoo says that I must press reset ...
I did the 2 ways but however the LEDs never stop turning off and on and the TFTP fails to advance and freezes it does nothing ... the pc does not recognize that no router is connected to the lan _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)