Posted: Sun Aug 01, 2021 5:36 Post subject: New Build - 08/01/2021 - r47117
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r47117 std (08/01/21)
Kernel: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Previous: r47097
Mode/Status: Gateway / working
Issues/Errors: Working well so far.
Uptime: 1hr 42mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 70.2 °C / WL0 47.8 °C / WL1 53.8 °C
Posted: Mon Aug 02, 2021 2:51 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r47117 std (08/01/21) Kernel: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 07-29-2021-r47097 Status: Working really well so far, still testing. I did notice unusually high CPU load after 24 Hours. 50% and up. Temperatures: CPU 68.6 °C / WL0 51.5 °C / WL1 56.5 °C
Speedtest-3.jpg
Description:
Speedtest Over 5.8Ghz Wireless
Filesize:
64.34 KB
Viewed:
5620 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47117 std (08/01/21)
Kernel: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound & CTF & FA Enabled. NAT/QoS Off
Reset: No, not this time
Previous : r47097
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 74.7 °C / WL0 49.3 °C
Load: 0.04 0.09 0.08
Uptime 14h
Errors: No, not at this moment.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Mon Aug 02, 2021 9:05 Post subject: New Build - 08/01/2021 - r47117
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.277 #10795 Sun Aug 1 02:52:33 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: SFE and / or CTF feature starting many times
Status: Working
Uptime: More than 13h
Device is updated via ssh. Working of SFE and CTF still no fixed. That features launched many times. Now device have a bit more sources utilisation. Router working rather good.
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin Linux R7000P 4.4.277 #3748 SMP Sun Aug 1 02:45:30 +07 2021 armv7l DD-WRT
Previous/Reset: 07-08-2021-r47033; no reset
Mode/Status: Gateway, AP, DNS [dnsmasq], NTP server, YaMon3, opkg: syslog-ng, NFS server
Issues/Errors: Reboot from shell after `write linux` reports 'Segmentation fault' but reboots anyway; does not appear to cleanly shut down servers, however.
Current directory was a SMB mount. During and after the `write linux`, large numbers of messages in syslog; 'block' and 'cache' entry vary:
Code:
Aug 2 08:52:03 R7000P kernel: SQUASHFS error: xz decompression failed, data probably corrupt
Aug 2 08:52:03 R7000P kernel: SQUASHFS error: squashfs_read_data failed to read block 0x8cc6ca
Aug 2 08:52:03 R7000P kernel: SQUASHFS error: Unable to read fragment cache entry [8cc6ca]
Aug 2 08:52:03 R7000P kernel: SQUASHFS error: Unable to read page, block 8cc6ca, size 17534
Aug 2 08:52:03 R7000P kernel: SQUASHFS error: Unable to read fragment cache entry [8cc6ca]
Aug 2 08:52:03 R7000P kernel: SQUASHFS error: Unable to read page, block 8cc6ca, size 17534
More detailed log attached.
No apparent errors following reboot.
upgrade-47117.txt
Description:
syslog, from start of `write linux` to post-reboot
Router/Version: Asus RT-AC68U rev. A1 & C1
Firmware: asus_rt-ac68u-firmware.trx
Kernel: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Mode: Gateway / AP
Reset: No, flashed from CLI
Previous: 07-29-2021-r47097
Status: Working well, no issues found _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47117 std (08/01/21)
Kernel Version: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Previous/Reset: r47090 / No, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,SFE,SSH,Syslog
Services Disabled: WiFi,QoS,ttraff,Telnet,NAS,Samba
OffSite #1
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47117 std (08/01/21)
Kernel Version: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Previous/Reset: r47090 / No, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba
TESTING at Home for OffSite #2
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47117 std (08/01/21)
Kernel Version: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Previous/Reset: r47090 / No, CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none /none
Services Used: DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba
This Router is NOT Deployed to Off-Site #2 yet, TESTING.
All running over 7 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Firmware: v3.0-r47117 std (08/01/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Previous: v3.0-r47090 std (07/26/21)
Mode/Status: AP wired and wireless / Up and running for 1 1/2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.5 °C / WL1 51.7 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r47117 std (08/01/21) (prev. DD-WRT v3.0-r47097 std (07/29/21))
Kernel: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, since release.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-47117_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r47117 big (08/01/21) (prev. DD-WRT v3.0-r47097 big (07/29/21))
Kernel: Linux 4.4.277 #10807 Sun Aug 1 03:09:14 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, since release.
Router/Version: Asus RT-AC68U B1
File/Kernel: asus_rt-ac68u-firmware.trx
Previous/Reset: r47040 / yes - nvram erase
Mode/Status: AP Only
Issues/Errors: None. Working Well! _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47117 std (08/01/21)
Kernel Version: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Previous/Reset: r47090 / No, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,SFE,SSH,Syslog
Services Disabled: WiFi,QoS,ttraff,Telnet,NAS,Samba
OffSite #1
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47117 std (08/01/21)
Kernel Version: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Previous/Reset: r47090 / No, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba
TESTING at Home for OffSite #2
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47117 std (08/01/21)
Kernel Version: Linux 4.4.277 #3742 SMP Sun Aug 1 02:01:20 +07 2021 armv7l
Previous/Reset: r47090 / No, CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none /none
Services Used: DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba
This Router is NOT Deployed to Off-Site #2 yet, TESTING.
All running over 7 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!
Deployed R7000 r47117 to OffSite #2 via swap (from old r44xxx build). Uptime over 20 hours, no phone call so it must be fine. This site has iPhones, mac, pc & streaming devices high Internet demand. I don't have remote access more likely I didn't setup the WAN SSH Access when I was on site; next time will have to check that out. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531