Posted: Sun Mar 03, 2024 17:15 Post subject: New Build - 03/03/2024 - r55262
Welcome to Atheros r55262 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Netgear R7500v2
Kernel: Linux 6.1.80 #113 SMP Sun Mar 3 03:42:19 +07 2024 armv7l
Previous/Reset: 55179 / No Reset
Mode: Gateway+AP, SFE Disabled, STP Disabled, Wifi 5(VANILLA)/2.4(VANILLA) Main+Guest(VAP), DNSMasq, USB(3.2, Ext2)/Entware, DNSCrypt, NAS/Samba, Static & DHCP, SSH, FTP, QoS (WAN) using MAC.
Issues/Errors: Upgraded Ok. SMB still crashes the router on saves to router mounted USB Drive. Otherwise everything else seems Ok.
Thanks to BS and crew for all your good work.
To test the SMB I read a test.txt file from the USB and save an edit. To repair the drive corruption I perform an fsck which appears to consistently detect damage in the same filesystem structures.
Code:
# fsck -v /dev/sda1
fsck 1.47.0 (5-Feb-2023)
e2fsck 1.47.0 (5-Feb-2023)
opt was not cleanly unmounted, check forced.
Pass 1: Checking inodes, blocks, and sizes
Inode 56 has a bad extended attribute block 1006. Clear<y>? yes
Inode 56, i_blocks is 8, should be 4. Fix<y>? yes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences: +14848 -14849
Fix<y>? yes
opt: ***** FILE SYSTEM WAS MODIFIED *****
7117 inodes used (0.15%, out of 4890624)
823 non-contiguous files (11.6%)
7 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 823/14/0
379997 blocks used (3.89%, out of 9778688)
0 bad blocks
0 large files
Joined: 13 Aug 2013 Posts: 6872 Location: Romerike, Norway
Posted: Sun Mar 03, 2024 19:09 Post subject:
Router/Version: Netgear R7800
File/Kernel: 6.1.80 #113 SMP Sun Mar 3 03:42:19 +07 2024 armv7l
Previous/Reset: No Reset
Mode/Status: Working
Issues/Errors:
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r55262 / Linux 3.18.140-d6 #194452 Sun Mar 3 07:57:19 +06 2024 mips
Previous/Reset: r55209 / no
Mode/Status: AP wired and wireless / Up and running for 4:12 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Netgear WNDR3700 V4
DD-WRT v3.0-r55262 std (03/03/24)
Linux 3.18.140-d6 #194494 Sun Mar 3 09:42:18 +06 2024 mips
scp 'firmware.bin' install over r55209
WAP + OVPN server -- all ok
#
Linksys WRT160NL
DD-WRT v3.0-r55262 std (03/03/24)
Linux 3.10.108-d11 #154240 Sun Mar 3 06:10:00 +06 2024 mips
GUI install over r55209
WAP + OVPN server -- all ok
EDIT: and this is all worky ok also ...I VPNed to it & done the upgrade
...just have to disconnect soon as it starts the reboot
Linksys E2100L
DD-WRT v3.0-r55262 std (03/03/24)
Linux 3.10.108-d11 #154244 Sun Mar 3 06:15:25 +06 2024 mips
GUI install over r55209
WAP + OVPN server
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Mon Mar 04, 2024 16:01 Post subject:
Router/Version: Netgear R7800 x 3
File/Kernel: DD-WRT v3.0-r55262 std (03/03/24)
Previous/Reset: DD-WRT v3.0-r55209 std (02/27/24), last reset at 54905
Mode/Status: Gateway (SFE disabled), Access Point (VANILLA firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k), IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 wired access points (VANILLA firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k)
Issues/Errors:
Up 19 hours. USB 3.0 working properly for Entware and "jffs" partitions. Wireguard and OpenVPN servers working as expected and throughput sufficient to open video files on network shares. Speed (tested via nPerf.com) is very close to published, both wired and wireless, which is equal or favorable to the ISP router. SFE remains disabled due to random reboots. Router LAN lights are working.
I almost feel bad that I have nothing to report. Everything I use in the firmware works fine (except SFE but that seems like a K6 thing, and I don't really need it).
Issues/Errors: Lost 5GHz connection after Radio Time scheduling
Installed r55262, made changes to radio time scheduling, hit 'Save', then 'Apply Settings'.
Lost 5GHz connection, could connect w/2.4GHz. Hard reboot also didn't fix it.
Went back to r55052 and restored settings from backup file I had for that version. everything worked fine.
Then installed r55262 again, made a backup of settings.
Went back to radio scheduling to check how it behaves.
made changes to radio time scheduling, hit 'Save', then 'Apply Settings'.
Lost 5GHz connection again, could connect w/2.4GHz. Hard reboot also didn't fix it.
I reverted settings from backup that I made and everything is working fine.