Posted: Fri Jan 12, 2024 19:24 Post subject: New Build - 01/12/2024 - r54905
Welcome to Marvell r54905 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Linksys WRT1200ac v1
File/Kernel: r54905 Linux 6.1.72 #227 SMP Fri Jan 12 03:41:27 +07 2024 arm
Previous/Reset: r54682 No reset
Mode/Status: Gateway,VPN, Stable
Issues/Errors: None (Kernel above as it is shown on my 1200 v1)
BTW, the "Policy based Routing" section for the "OpenVPN Client" in combo with the "Static Leases" has been working great for me. Bypassing the vpn with devices that won't stream certain apps if the vpn is enabled has saved me much time. Not sure how long ago I enabled the PBR so hence the long past due thanks.
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Sat Jan 13, 2024 1:27 Post subject:
Router: WRT3200ACM
Version: DD-WRT v3.0-r54905 std (01/12/24)
File: ddwrt-linksys-wrt3200acm-webflash.bin
Kernel: Linux 6.1.72 #227 SMP Fri Jan 12 03:41:27 +07 2024 arm
Previous: DD-WRT v3.0-r54475 std (12/07/23)
Reset: No
Mode: Gateway, wlan0 AP, wlan1 AP, & wlan2 disabled. Privoxy, SmartDNS.
Status: Ok
Uptime: ~26 hours
Issues/Errors: None. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sat Jan 13, 2024 17:22 Post subject:
PavelVD wrote:
I don’t know if I need to worry about this, everything seems to be working. I saw the differences and therefore I report.
no worries about it. i will take care if it. for some reason the thermal reporting for wifi chipset is broken. i will work on this _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Router/Version: Linksys WRT3200ACM
File/Kernel: r54905
Previous/Reset: r54682 / upgrade, factory defaults after boot, enter new settings (always)
Mode/Status: AP, basic home internet and media server / reverted to r54682 due to smb causing reboots
Issues/Errors: smb transfer causes router to reboot at completion
Change(s) (to smbd?) after 1/2/24 r54682 are causing my WRT3200ACM to reboot when transferring via SMB (from Windows 10) to flash drive attached to router. When copy progress hits 99%, it freezes and router reboots. (same transfer via FTP works properly) After reboot, when smb is again accessible, it seems the file finished transferring successfully before the reboot. r54682 and earlier have been working properly over many years.