Builds AFTER 54475 do not work on 1900ACv1

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
Rickers
DD-WRT User


Joined: 10 May 2015
Posts: 106

PostPosted: Thu Dec 21, 2023 15:15    Post subject: Builds AFTER 54475 do not work on 1900ACv1 Reply with quote
1900ACv1 being disrespected again...

Has anyone successfully updated a 1900ACv1 with a build after 54475?

One noticeable thing is all the files after 54475 are less than half the size they usually are. 54475 is 37.X MB and all subsequent ones are 16.x MB.

Any ideas?

Regards, Rick
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14249
Location: Texas, USA

PostPosted: Wed Dec 27, 2023 15:46    Post subject: Reply with quote
Should be fixed in the next release per BrainSlayer.

https://svn.dd-wrt.com/changeset/54611
https://svn.dd-wrt.com/changeset/54612

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Rickers
DD-WRT User


Joined: 10 May 2015
Posts: 106

PostPosted: Fri Dec 29, 2023 6:40    Post subject: Reply with quote
Thanks!
llFawkes17ll
DD-WRT User


Joined: 24 Jul 2018
Posts: 158

PostPosted: Mon Jan 01, 2024 0:11    Post subject: Reply with quote
Has either the r54637 or r54652 resolved the lastest issue of not being able to install on the WRT1900AC v1?
wrtbob
DD-WRT Novice


Joined: 31 Dec 2023
Posts: 1

PostPosted: Mon Jan 01, 2024 13:49    Post subject: Reply with quote
llFawkes17ll wrote:
Has either the r54637 or r54652 resolved the lastest issue of not being able to install on the WRT1900AC v1?


I upgraded from 54475 to 54652 two days ago, no issues so far except for the following which were going before upgrading

USB port 3.0 not working
and @boot I get this:

Cannot change IRQ 24 affinity: I/O error │
irqbalance warning IRQ 24 affinity is now unmanaged │
irqbalance warning Cannot change IRQ 40 affinity: I/O error │
irqbalance warning IRQ 40 affinity is now unmanaged │
irqbalance warning Cannot change IRQ 44 affinity: I/O error │
irqbalance warning IRQ 44 affinity is now unmanaged │
irqbalance warning Cannot change IRQ 45 affinity: I/O error

_________________
Linksys WRT1900AC
DD-WRT v3.0-r54652
Rickers
DD-WRT User


Joined: 10 May 2015
Posts: 106

PostPosted: Tue Jan 02, 2024 16:43    Post subject: Reply with quote
54637, 54652, and 54682 all boot on 1900ACv1. 54637 shows as 54636 in the GUI.

Haven't been up long enough to determine if there are any issues, but they boot.

Hope the USB gets fixed soon because I have to fall back quite far in builds when I need iPhone tethering to work.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14249
Location: Texas, USA

PostPosted: Tue Jan 02, 2024 19:36    Post subject: Reply with quote
Is USB core support enabled at a minimum? For USB storage, is USB storage support enabled and proper mount points, etc. set? USB Printing...? Keep in mind, that there are bits that must be enabled for all USB ports to work AFAIK. The iPhone Tethering / Mobile Broadband bits don't just automatically work to the best of my knowledge.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Rickers
DD-WRT User


Joined: 10 May 2015
Posts: 106

PostPosted: Thu Jan 04, 2024 19:03    Post subject: Reply with quote
iPhone tethering didn't work for me on recent builds (I turned on all USB options) on 1900ACv1. I randomly picked a version from around 9 months ago and it worked.

Generally, I just see others reporting issues. When I get time, I'll plug in a drive to the router and see if I can get it to work with the newest build.
WENED
DD-WRT Guru


Joined: 30 May 2017
Posts: 582
Location: Rural Manitoba

PostPosted: Sun Jan 14, 2024 19:58    Post subject: Reply with quote
I had problems updating my 1900's and finally found that the cause was I needed to clear mvram (nvram erase && reboot) first. Although the current partition was updateable the alternate was an older build. I took a backup of the current operating partition. I cleared mvram and updated to the latest build (twice) so that both partitions were up to date.

Before doing the preceding an update would fail and lock up.

_________________
Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55819
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN

WRT3200acm r55819 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40

WRT1900Ac V1 5Ghz r55819 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)

WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55819
2.4Ghz AP Ch1 HT20 Mixed

WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55819
2.4Ghz AP Ch1 HT20 Mixed

WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use

3200 Master -> LAN -> 1900ACS -> WDS 5Ghz -> 1900 V1
3200 Master -> WDS -> 3200 Slave & 1900V1
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum