Posted: Sun Jan 29, 2023 11:00 Post subject: New Build - 01/29/2023 - r51530
Welcome to Atheros r51530 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Linksys EA8500...main gateway
DD-WRT v3.0-r51530 std (01/29/23)
Linux 4.9.337 #1509 SMP Sat Jan 28 04:57:30 +07 2023 armv7l
scp 'firmware.bin' install over r51506
all ok
#
Netgear WNDR3700 V4
DD-WRT v3.0-r51530 std (01/29/23)
Linux 3.18.140-d6 #162142 Sun Jan 29 10:10:09 +06 2023 mips
scp 'firmware.bin' install over r51506
all ok
Posted: Sun Jan 29, 2023 17:22 Post subject: 2.4Ghz WiFi breaks with this build and the last
Router/Version: Netgear R9000 Nighthawk X10 AD7200
Firmware: DD-WRT v3.0-r51530 std (01/29/23)
Kernel: Linux 4.4.302-st28 #8588 SMP Sun Jan 29 06:24:55 +06 2023 armv7l
Previous: DD-WRT v3.0-r51440 std (01/19/23)
Update Method: Web Interface
Mode/Status: Gateway/Ok
Reset: No
Issues/Errors: 2.4Ghz WiFi, it seems like this build and the last build breaks my 2.4Ghz WiFi network. If I role back to build 51440 it fixes my 2.4Ghz WiFi network. I have had the same settings for at least a year and upgrade all the time and haven't had my 2.4Ghz network break until the last build and this build.
Router/Version: TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #162100 Sun Jan 29 08:47:36 +06 2023 mips
Previous/Reset: r51506 / no
Mode/Status: AP wired and wireless / Up and running for 3 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Posted: Sun Jan 29, 2023 23:38 Post subject: r51530 seems to fix 5GHz LED and startup script issues
DD-WRT v3.0-r51530 std (01/29/23)
Router/Version: Netgear r7800 File/Kernel: dd-wrt-webupgrade 01-29-2023-r51530.bin / Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l Previous/Reset: No reset Mode/Status: AP / working OK Issues/Errors: 5GHz LED and startup script / no errors, log is clean
============================================
UPDATE Jan 31 - after running fine the internet stopped. All the network connections were there, but could not reach internet. Power reset DSL modem, still no internet.
Powered router off and on, all is good except startup script did not run and 5GHz LED was off again. Reloaded NVRAM and still no 5GHz LED.
Rebooted router, no difference. Reloaded r51530 and same.
Manually ran startup script, was OK and all working fine except 5GHz LED,
===============================================
Updated from 01/25/2023 - r51506 using web interface
Everything working as it is supposed to as far as I can see.
5GHz LED working after update, no additional re-boot required.
Startup script executed, which seemed to be random fail in previous versions.
Great job by coders & gurus, and many thanks for your continued good work! _________________ - a candle loses nothing by lighting another candle
Last edited by computerperson on Tue Jan 31, 2023 15:02; edited 2 times in total
Posted: Tue Jan 31, 2023 22:30 Post subject: r51530
tplink ArcherC7v5
02/01/2023 Actions taken on 01/31/2023
Installed DD-WRT v3.0-r51530 std (01/29/23)
Kernel Ver Linux 3.18.140-d6 #162124 Sun Jan 29 09:26:33 +06 2023 mips
Via CLI, No Reset
Prior version r51140
Used as AP/Gateway
5g Vanilla
2.4g DD-WRT
dhcp, dnsmasq, dns
Issues unknown at this point. _________________ ARCHER-C7v5 | v3.0-r55460 std | AP Gateway
WNDR4000|v24-52189_NEWD-2_K3.x_mega|Inactive Spare
Router/Version: TP-Link WDR4900 V1
File/Kernel: tl-wdr4900-webflash.bin / Linux 4.4.302-st25 #2942 Wed Nov 23 04:45:32 +06 2022 ppc
Previous/Reset: r50931 / yes
Mode/Status: Gateway / bad flash
Issues/Errors: yes
Unsuccessful firmware installation. All new versions are broken since r50931
It is better to refrain from installing, having no experience in recovery
Router/Version: TP-Link TL-WR1043ND v4
File/Kernel: factory-to-ddwrt.bin / tplink_wr1043nd-v4.bin / Linux 3.18.140-d6 #162116 Sun Jan 29 09:08:55 +06 2023 mips
Previous/Reset: r51506 / no
Mode/Status: AP wired and wireless / Up and running for 3 hours
Issues/Errors: Nothing significant
Thank you BS and gurus _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r51530 std (01/29/23) (prev. DD-WRT v3.0-r51506 std (01/25/23))
Kernel: Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed two days ago, OK.
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r51530 std (01/29/23) (prev. DD-WRT v3.0-r51506 std (01/25/23))
Kernel: Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Mode: Gateway, SFE enabled, 2.4G and 5G wifi; DHCP Server
5G - AP (WDS) - Initial SSID hidden + VAP
2G - AP + VAP; TurboQAM (QAM256) - Disabled
Reset: No
Status: Operational. 2G was not operational until TurboQAM (QAM256) was disabled
5Ghz Wifi light not working
There are 2 of these
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r51530 std (01/29/23) (prev. DD-WRT v3.0-r51506 std (01/25/23))
Kernel: Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Mode: Router, SFE enabled, 2.4G and 5G wifi.
5G - Station (WDS) - SSID hidden + VAP
2G - AP + VAP; TurboQAM (QAM256) - Disabled
Reset: Yes
Again. with TurboQAM there was no 2G.
5G wifi light is working on these 2 after a reset
The main 5G SSID is hidden and is used for the backbone. The VAP is the same name on all 3 devices
The main 2G SSID is the same name on all 3 devices. The VAP is unique per device and used purely for some testing
I'll get around to resetting the Gateway at some point, but redoing the config takes a little time compared to the routers