Joined: 05 Oct 2008 Posts: 667 Location: Helsinki, Finland / nr. Alkmaar, Netherlands
Posted: Tue Mar 02, 2021 15:07 Post subject:
bushant wrote:
ho1Aetoo wrote:
After antsvx's post in the tracker, I wanted to test this today anyway....
So RTS Treshold + ACK Timing 0 works for me too
Works for me also R7500v2 r45875 using either DD-WRT or Vanilla firmware.
I wouldn't mind trying that build, too, but I have no clue where to find alpha builds. I suppose it's in a hidden directory.
Currently running 45863 on an R7800.
2.4 GHz: Vanilla f/w, RTS/CTS disabled.
5 GHz: DD-WRT f/w, RTS/CTS enabled, threshold 2346.
Before disabling RTS/CTS on 2.4 GHz, using recent builds I experienced very regular annoying (15 or more seconds long) interruptions in video streaming to a Chromecast module.
Disabling RTS/CTS apparently took care of that.
Before disabling RTS/CTS I also saw some WebGUI loading crashes when I experimentally used WiFi for my laptop upon upgrading the f/w. I reconnected the ethernet cable soon after and the WebGUI problems were gone. I didn't make the connection until I read about WebGUI problems on the forum.
Ack timing for both radio's has been at 450 for a long time. Small apartment home with just a few WiFi clients.
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Tue Mar 02, 2021 18:21 Post subject:
He meant the syslog / kernel log output from /var/log/messages from the router. You can either go to 'Status->Syslog' and copy/paste the contents of each page into a text file and attach it to a post, OR copy all from PuTTY, depending on how far your scrollback is set to go. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Router/Version: R7800
File/Kernel: dd-wrt-webupgrade-netgear_r7800-r45863.bin
Previous/Reset: dd-wrt-webupgrade-netgear_r7800-r45849.bin / no reset
Mode/Status: WDS 5GHz
Issues/Errors: I didn't spend much time diagnosing what happened but it's the same issue as the previous build. I created a 5GHz VAP and a 2.4 GHz AP and they tested OK but when I disabled them the WDS station radio wifi quit working. The 5GHz radio indicator was lit on the router. I did this on just one WDS station router this time so I only had to reset and restore this one router to get it working as a WDS station again.
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Wed Mar 03, 2021 16:57 Post subject:
Yes, I am hoping this pregnant pause in commits means that the alpha will be uploaded and released as a beta today... since pretty much all of my test devices are running it _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Yes, I am hoping this pregnant pause in commits means that the alpha will be uploaded and released as a beta today... since pretty much all of my test devices are running it