Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45563 std (01/24/21)
Kernel: Linux 4.4.252 #1881 SMP Sat Jan 23 13:44:41 +07 2021 armv7l
Previous: r45493
Mode/Status: Gateway / working
Issues/Errors: Working well so far.
Uptime: 15mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 66.9 °C / WL0 46.5 °C / WL1 52.3 °C
Router/Version: Netgear R6250 v1
Firmware: DD-WRT v3.0-r45563 std (01/24/21)
Kernel: Linux DD-WRT 4.4.252 #1881 SMP Sat Jan 23 13:44:41 +07 2021 armv7l DD-WRT
Mode: Gateway, Wireless AP
Reset: No
Previous: 01-19-2021-r45493
Upgrade: Web and 1st succeed without reset.
DHCP Server: Enabled - Running (no need to dial-up like DSL, it is cable connection after modem)
Disable (Samba, WRT-radauth, WRT-rflow, MAC-upd,CIFS Automount, Sputnik Agent, USB Support)
5GHZ works stable and less than 100 errors on TX/RX everyday
AC/N Mixed
CH64 VHT80 (Verified on Android/"WiFi Overview 360" that those channels are only NOT occupied, from 50-64)
upper+upper
2 Beamformings and Airtime Fairness enabled.
Preamble and Shortslot Override short. (Any device found the SSID plus connection extremely slow)
TX power:Auto
Beacon Interval: 300
DTIM Interval:1
Fragmentation Threshold=RTS Threshold=784
Max Associated Clients : 64
2.4GHZ works stable but more than 10000 errors on TX/RX everyday
N-Only
CH11 (Verified on Android/"WiFi Overview 360" that all channels are occupied by neighbour channels are only NOT occupied, from 50-64)
Preamble and Shortslot Override LONG and Auto. (Any device found and connection SSID very faster)
TX power:Auto
Beacon Interval: 400
DTIM Interval:1
Fragmentation Threshold=RTS Threshold=784
Max Associated Clients : 16
Why gave up Netgear official firmware ? Because I need more functions.
Why gave up Fresh-Tomato ? Because the Linux Kernel is 2.xx, but it indeed supports dual bands well
Why gave up OpenWRT? OpenWRT is very good, I did dnscrypt v2 and wireguard works well (Do you know that the combination will have a fixed public IP literally ?). However, Netgear R6250 works as a wired router only.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45563 std (01/24/2021)
Kernel: Linux 4.4.252 #1881 SMP Sat Jan 23 13:44:41 +07 2021 armv7l
Previous: DD-WRT v3.0-r44944 std (12/08/2020)
Mode/Status: Router / working
Reset: no
Issues/Errors: Working well so far.
Uptime: >60 days
Will update if I run into issues.
Last edited by thunderhead on Sun Apr 04, 2021 11:04; edited 2 times in total
Router Model: Linksys E1500
Firmware Version: DD-WRT v3.0-r45563 big (01/24/21)
Kernel Version: Linux 2.6.24.111 #19972 Sun Jan 24 00:34:11 +07 2021 mips
Lo wifi
Router booted but was not talking out ethernet ports. Connected via wifi and executed the orphaned interfaces fix from wiki, was then able to connect via ethernet port.
Wifi appears to not be very sensitive on a Site Survey only picked up 1 neighbor while other dd-wrt routers pick up around 6 of them
Firmware: v3.0-r45563 std (01/24/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.252 #1881 SMP Sat Jan 23 13:44:41 +07 2021 armv7l
Previous: v3.0-r45493 std (01/19/21)
Mode/Status: AP wired and wireless, Up and running for 24 hours.
Reset: Soft boot before and after upgrade
Temperatures: CPU 58.6 °C / WL0 45.1 °C / WL1 50.4 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
There is a mysterious "Sysctl" tab in the Administration tab that seems to allow a lot of fine-tuning. It is very tempting to change some of these just to see what happens.
There is a minor issue with the packet count on wl0.1 and "Connected Clients" stuck at zero. The wl0 and wl1 counts seem correct.
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: Asus RT-AC68U
Firmware: DD-WRT v3.0-r45563 std (01/24/21)
Kernel: Linux 4.4.252 #1881 SMP Sat Jan 23 13:44:41 +07 2021 armv7l
Previous: stock
Mode/Status: Client Bridge to Fritzbox 7590 (5 Ghz), AP (2,4 Ghz)
Issues/Errors: No issues despite the Client Bridge
Uptime: 26h with constant load 10 Mbit/s up, 2 Mbit/s down from one of the Ethernet clients. Connection to all other clients stable
Upgrade: Asus miniweb recovery thing, erased NVRAM
Reset: yes
Posted: Thu Jan 28, 2021 1:14 Post subject: EA6300v1 firmware update page
Router/Version:Linksys EA6300v1
File/Kernel:v3.0 r44715 std/Linux 4.4.241 #1322 SMP Mon Nov 2 06:39:27 GMT 2020 armv7l
Previous/Reset: reset to default selected
Mode/Status:Gateway
Issues/Errors: After attempting to load r45563 from the firmware update page the router alternated from pingable to "Destination Host Unreachable" 5 times then it boot up into the previous firmware r44715.
There is a mysterious "Sysctl" tab in the Administration tab that seems to allow a lot of fine-tuning. It is very tempting to change some of these just to see what happens.
Pimp!
All kinds of fun stuff I could break! Looks interesting! thanks for pointing that out!
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Thu Jan 28, 2021 7:56 Post subject:
twindragon6 wrote:
hurleyp wrote:
There is a mysterious "Sysctl" tab in the Administration tab that seems to allow a lot of fine-tuning. It is very tempting to change some of these just to see what happens.
Pimp!
All kinds of fun stuff I could break! Looks interesting! thanks for pointing that out!
its been there for a while...
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45563 std (01/24/21)
Kernel: Linux 4.4.252 #1881 SMP Sat Jan 23 13:44:41 +07 2021 armv7l
Update CLI 45493 > 45563
Reset: NO
Status: Operational 72h+
Errors: Working well so far, none for my set up... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Thu Jan 28, 2021 20:58 Post subject: New Build - 01/24/2021 - r45563
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.252 #6373 Sun Jan 24 17:33:30 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: Described below
Status: Working
Uptime: ~103h
Device is updated via ssh. Generally router working good. Issues: "kern.warn kernel: br0: received packet on eth1 with own address as source address". For fix this I try to enable STP for "br0". Problem is still.
Eth0 interface haven't MAC that I configured via GUI.
