Posted: Fri Jun 17, 2016 0:18 Post subject: Crowdfunding to purchase routers for donation
I've seen quite a few discussions about donating routers, criticisms for creating firmware hacks for unsupported routers, when will this router be supported, etc. and I wonder if setting up a crowdfunded donation page on something like GoFundMe to purchase said router(s) would be an option.
Moderator note 10.21.23: The following links are to provide information on hardware donations. See the “Commercial_Invoice_Template“ for shipping address information. Please be advised, current situation in the EU makes shipping from outside the EU, especially from the USA, difficult. German / EU customs has more stringent requirements involved. The best option is to use vendors such as amazon.de, ebay.de, etc. to procure hardware donations to ship to the lead developer. The other option is to provide full OEM bootlog and full flashdump via serial. Thanks for your understanding and interest in contributing to DD-WRT! -kp69
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Sat Mar 28, 2020 16:03 Post subject:
If people want to set up such a thing to get some new devices supported, great. But last time we did one, well, I know one person contributed the most. I'm all for it, but we need someone who is close enough to Germany that shipping costs, etc. aren't such an issue. Problem is, people don't want to put their money where their mouth is, so...
I’ll try donating a Netgear Nighthawk RAX120 in the next few weeks once its uprooted out of one of my “stock router for guests” networks.
That’s ahead of the curve on ath1*k open source ax code but better early than late on messing with the hardware and a lot cheaper than reference qualcomm kit for 8074 @ 2.2GHZ _________________ Fleet Deployment of Netgear Nighthawk X10 R9000s
File: DD-WRT v3.0-r45229 std (01/01/21)
Active Settings: SFE, Multi-DHCP, Net Isolation, 10 Gbps SFP+ Module, VLANs, Wireguard Client, FreeRadius, WAN + 4G LTE fail-over, All internal radios - Disabled
PfSense - Intel Xeon, 32GB ECC RAM - Suricata, pfBlockerNG, Squid Proxy + ClamAV, VLANs w/ 802.1x Auth
Cisco WiFi 6 Access Points - Client Isolation & Radius Auth via DD-WRT R9000 w/ WPA3 Enterprise
Cisco Switches - 802.1x-VLANs & Radius Auth via DD-WRT R9000
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Wed Apr 01, 2020 13:20 Post subject:
ironstaff wrote:
I’ll try donating a Netgear Nighthawk RAX120 in the next few weeks once its uprooted out of one of my “stock router for guests” networks.
That’s ahead of the curve on ath1*k open source ax code but better early than late on messing with the hardware and a lot cheaper than reference qualcomm kit for 8074 @ 2.2GHZ
Great!, When you have the RAX120 ready for donation, please PM me, I will send my token donation $100 to BS.
I have RAX120 and Costco RAX75 Also the TP-Link Archer AX11000 but its Broadcom based
Currently the better router with 210G ports is ASUS RT-89X:
Teardown:
http://bbs.ntpcb.com/simple/?t146299.html _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Sun Apr 05, 2020 3:21 Post subject:
Merlin is already working on porting the AX routers to his firmware. Nothing has been done yet here, but the current global status of things is likely holding some of it up. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net