Status: Samba not working, all the others are working
System info under Status says samba is enabled and running, I can see the shared files from Windows 7 but when I try to access those files from the television, it says: no stored files found.
I do not know if this will be of any help but the system log has these highlighted in red:
DD-WRT kern.err kernel: bcmsflash: found no supported devices
DD-WRT local5.err ksmbd: [ksmbd-worker/1084]: ERROR: Can't open `/tmp/smb.db': No such file or directory
DD-WRT local5.err ksmbd: [ksmbd-worker/1084]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
DD-WRT user.err wsdd2[1080]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
DD-WRT user.err wsdd2[1080]: Terminated received.
DD-WRT user.err wsdd2[1527]: Terminated received.
DD-WRT local5.err ksmbd: [ksmbd-manager/1530]: ERROR: WARNING: child process exited abnormally: 1531
local5.err ksmbd: [ksmbd-worker/2013]: ERROR: Can't open `/tmp/smb.db': No such file or directory
local5.err ksmbd: [ksmbd-worker/2013]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
local5.err ksmbd: [ksmbd-manager/2012]: ERROR: WARNING: child process exited abnormally: 2013
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Sun Apr 19, 2020 2:43 Post subject:
Well, the only way to rule out a bad configuration is to reset. There have been changes to Samba that may affect how you need to configure your router and client devices. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
I manually reconfigured the router with r42925. I started with basic setup, services, vpn, usb and nas. At this point I was able to view samba on television. I proceeded to wireless, wireless security and administration. I was able to access the internet but now, even though status, sys info says samba is enabled and running I cannot see any files on television anymore.
The errors in the system log is the same as mentioned above.
If the config for the new samba is different, can you point me in the direction of this guide?
For me the volumes didn't mount because the configured device names had changed. Changed the device names in the config and all start working again.
My volume appeared to be mounted correctly. I detached the external hard drive from the router and restarted the router without the drive and it would not boot. I stopped the router, attached the external hard drive and restarted the router. I could access samba via the television but the files were doubled. I rebooted the router again and samba was working via the television but now the files were tripled. Also the jff was mounted twice in usb. Another instance I reboot the router and there is no file to access via the television.
I have reinstalled r42514 and all is fine with samba. I did not do a reset and the doubled jff is there. I will perform a reset for r42514
Looks like you have jffs both in nvram and on the disc.
I reinstalled r42514 with a reset to default. I manually config from start. Samba is working in r42514. Until there is a guide for samba in the kernel, I am staying with the tried and working beta