I have no idea, one thing 4 sure the error has been around for awhile _________________ WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
I am getting this with Firefox ESR 52.9.0 in private mode, which is pretty much the default configuration out of the box, I really didn't change much of anything. No extensions installed, NONE. So, it must be private mode doing it. It's really of no consequence to me, but an error non-error message is a little silly.
gufus wrote:
BTW
I don't get this error with openwrt
If only OpenWRT would Debian up their Broadcom support, maybe they'd be an option for some folks. Can't support wi-fi for crap, even though the drivers are there to use freely in most Linux distros.
Guys I have 2 hard disks connected to Western Digital and properly configured with Samba and Jffs. The problem is that with all the new builds instead of going on standby after a certain time as it always happened one of the two remains on. Does the same thing happen to you too? Now I'm stuck at 39572 and I don't have this kind of driver problem. Poor hard drives that stay on.
Guys I have 2 hard disks connected to Western Digital and properly configured with Samba and Jffs. The problem is that with all the new builds instead of going on standby after a certain time as it always happened one of the two remains on. Does the same thing happen to you too? Now I'm stuck at 39572 and I don't have this kind of driver problem. Poor hard drives that stay on.
I'm experiencing this same issue with my old Western Digital USB drive using recent builds on a WRT32X. Does anyone have settings which allow these drives to spin down? My "fix" so far has been to copy the contents of the drive onto a large flash drive and mount that instead...
Joined: 26 Aug 2006 Posts: 31 Location: Brooklyn, NY
Posted: Fri Aug 16, 2019 5:41 Post subject:
on a wrt-1900ac v1,
With this build I still get wlan drops,
tried startservice wlan, but that doesn't help,
not even rebooting helps. To recover, I have to physically turn off the router, then it comes back.
falling back to r40459, the last good build that I can find for the wrt-1900ac v1. _________________ Linksys WRT1900AC V1
I want to know for the wrt32x. Does Tri band wifi work.. I can't get all ath, to work so the ath0 and ath1 is working but not 2. Can someone please confirm this and tell me which firmware is the most stable?
I want to know for the wrt32x. Does Tri band wifi work.. I can't get all ath, to work so the ath0 and ath1 is working but not 2. Can someone please confirm this and tell me which firmware is the most stable?
Triband is not equivalent to tristream (the router is tristream, but dualband). Ath0/1/2 represent the bands, not the streams. You still only have two bands, 2.4GHz and 5GHz, but the router can utilize three streams on each band at the same time. Ath2 should be disabled, it's used for DFS or something. Someone can correct me if I'm wrong here. _________________ Linksys WRT3200ACM r41586
- ExpressVPN | VAP & PBR | Synology NAS