Wireless Bridge
From DD-WRT Wiki
Revision as of 15:04, 23 July 2005 (edit) Sveasoft (Talk | contribs) (Added section headings) ← Previous diff |
Revision as of 12:09, 5 August 2005 (edit) (undo) 213.139.154.67 (Talk) (→Introduction - typo) Next diff → |
||
Line 4: | Line 4: | ||
Wireless Bridging does exactly what it sounds like. It will allow a WRT54G to act as a bridge between a wireless router (of any make/brand) and the ethernet ports on the WRT54G. This is unlike [[Client Mode Wireless]] in that in Client Mode, the WRT acts as a client connecting to the main router creating 2 seperate networks and enabling NAT between the wireless and the wired ports. | Wireless Bridging does exactly what it sounds like. It will allow a WRT54G to act as a bridge between a wireless router (of any make/brand) and the ethernet ports on the WRT54G. This is unlike [[Client Mode Wireless]] in that in Client Mode, the WRT acts as a client connecting to the main router creating 2 seperate networks and enabling NAT between the wireless and the wired ports. | ||
- | Bridging does not have these problems and wired clients simply join the | + | Bridging does not have these problems and wired clients simply join the original network. This makes portforwarding easier, as well as puts all clients into the same broadcast domain. |
=Instructions= | =Instructions= |
Revision as of 12:09, 5 August 2005
You are here: Main Page/DD-WRT Doku (EN)/Wireless Bridge
Contents |
Introduction
Wireless Bridging does exactly what it sounds like. It will allow a WRT54G to act as a bridge between a wireless router (of any make/brand) and the ethernet ports on the WRT54G. This is unlike Client Mode Wireless in that in Client Mode, the WRT acts as a client connecting to the main router creating 2 seperate networks and enabling NAT between the wireless and the wired ports.
Bridging does not have these problems and wired clients simply join the original network. This makes portforwarding easier, as well as puts all clients into the same broadcast domain.
Instructions
A very good forum post was made by kkennedy070790 about running a WRT54G using DD-WRT as a wireless bridging.
Find it here: http://forum.bsr-clan.de/viewtopic.php?t=1750&highlight=bridge#11522
Future
This page should eventually contain the information in the link above with the origional link sited, along with any DD-WRT specific updates to the instructions.
External References
Wireless Bridging Forum Post by kkennedy070790
You are here: Main Page/DD-WRT Doku (EN)/Wireless Bridge