TP-Link TL-WR841nd v8
From DD-WRT Wiki
Revision as of 07:52, 21 July 2014 (edit) Bjoern (Talk | contribs) m (added factory revert based on forum post) ← Previous diff |
Revision as of 03:34, 25 February 2018 (edit) (undo) Ian5142 (Talk | contribs) (Added link to Where do I download firmware.) Next diff → |
||
Line 10: | Line 10: | ||
== Installation Instructions == | == Installation Instructions == | ||
- | Web-GUI Installation Image [ | + | Web-GUI Installation Image is found in the '''tplink_tl-wr841ndv8''' folder. See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]] for links. |
- | Installation Instructions can be found | + | Installation Instructions can be found [[Installation#Method_1:_Flashing_with_Web_GUI Installation - Web-GUI|here]]. |
== Factory Revert == | == Factory Revert == |
Revision as of 03:34, 25 February 2018
Informations
Official Product Page: TP-Link Product Info
Technical spec from wikidevi: TP-LINK_TL-WR841ND_v8.x
Installation Instructions
Web-GUI Installation Image is found in the tplink_tl-wr841ndv8 folder. See Where do I download firmware? for links.
Installation Instructions can be found here.
Factory Revert
A post from Woxy at This forum thread states : For those who may want to go back to TP-Link on WR841 v8 without webrevert file, here is the solution (I've just tested it succesfully on my own WR841n V8 ):
1. Download WinSCP and Putty (if you are using Windows machine).
2. Enable SSH and Telnet on DD-wrt.
3. Connect PC with router with LAN cable.
4. Download orig firmware from TP-LINK, extract and change name for more convinient for example: tplink.bin
5. Connect with WinSCP with SCP file protocol to router.
6. Transfer tplink.bin from PC to /tmp directory on router.
7. Close WinSCP, run Putty and connect to router with Telnet type connection.
8. While logged on router type the following command
mtd -r write /tmp/tplink.bin linux
and hit enter.
Now wait for a while. The Putty will close by itself, now observe diodes on router. They will eventually blink once all together, and this will be sing that router just rebooted.
Done, just go web browser and open 192.168.0.1. Voila' TP-Link is back Smile"