No-IP.com DDNS Client

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 17:37, 17 May 2005 (edit)
Sveasoft (Talk | contribs)
(Introduction)
← Previous diff
Revision as of 17:38, 17 May 2005 (edit) (undo)
Sveasoft (Talk | contribs)

Next diff →
Line 1: Line 1:
 +'''You are here: ''' '''[[Main Page]]'''/'''[[DD-WRT Doku (EN)]]'''/'''[[No-IP.com DDNS Client]]'''
 +
 +
==Introduction== ==Introduction==
There are a few DDNS services already integrated into the web interface for DD-WRT, but my favorite, [http://www.no-ip.com] isn't one of them. While I could easily run No-IP.com's Dynamic Update Client to keep my domain name in sync with my WAN IP address one of my desktop machines, I'd much rather have it running on the router. This wiki will show you how to set it up to automatically run on startup. There are a few DDNS services already integrated into the web interface for DD-WRT, but my favorite, [http://www.no-ip.com] isn't one of them. While I could easily run No-IP.com's Dynamic Update Client to keep my domain name in sync with my WAN IP address one of my desktop machines, I'd much rather have it running on the router. This wiki will show you how to set it up to automatically run on startup.
Line 26: Line 29:
==Usage== ==Usage==
 +
 +----
 +'''You are here: ''' '''[[Main Page]]'''/'''[[DD-WRT Doku (EN)]]'''/'''[[No-IP.com DDNS Client]]'''

Revision as of 17:38, 17 May 2005

You are here: Main Page/DD-WRT Doku (EN)/No-IP.com DDNS Client


Contents

Introduction

There are a few DDNS services already integrated into the web interface for DD-WRT, but my favorite, [1] isn't one of them. While I could easily run No-IP.com's Dynamic Update Client to keep my domain name in sync with my WAN IP address one of my desktop machines, I'd much rather have it running on the router. This wiki will show you how to set it up to automatically run on startup.

Prerequisites

You should already have:
-a Linksys WRT54G product
-DD-WRT installed as the firmware
-SCP or some other way to copy files to and from your desktop setup
-a NO-IP.com account you'd like to synchronise
-some knowledge of using ipkg to install packages
If your running Windows on your desktop:
-TextPad or Win32Pad
(or other *nix friendly text editor. DO NOT USE NOTEPAD)

Installation

Install the NOIP ipkg package

-Find the noip package in the OpenWRT Package Tracker.
You will need the URI of package to install it.
I used http://www.ramereth.net/openwrt/ipkg/noip_1.6.0_mipsel.ipk -telnet or ssh shell into the router -run the command ipkg install -d dest_name URI of package
dest_name should be root to install to /jffs dest_name should be ram to install to /tmp *Remember, /tmp is deleted on router reboot* Ex: ipkg install -d ram http://www.ramereth.net/openwrt/ipkg/noip_1.6.0_mipsel.ipk

Editing the noip.config file

More to come once I get my router un-fsk'd

Usage


You are here: Main Page/DD-WRT Doku (EN)/No-IP.com DDNS Client