Linksys WRT54GS v1.1
From DD-WRT Wiki
| Revision as of 20:54, 9 October 2009 (edit) Gelegrodan (Talk | contribs) ← Previous diff |
Revision as of 21:44, 19 January 2010 (edit) (undo) DHC DarkShadow (Talk | contribs) (→How to Flash) Next diff → |
||
| Line 6: | Line 6: | ||
| Make sure to get all the files you need first. | Make sure to get all the files you need first. | ||
| - | Start with [ | + | Start with [ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/01-16-10-r13637/broadcom/dd-wrt.v24_mini_generic.bin dd-wrt.v24_mini_generic.bin] |
| #Perform a [[Hard_reset_or_30/30/30]] reset | #Perform a [[Hard_reset_or_30/30/30]] reset | ||
Revision as of 21:44, 19 January 2010
Contents |
NEWD or VINT
WRT54GS v1.1 uses the Broadcom BCM4712 chip rev 1 but since the "wl0_corerev" is 7 (see NEWD or VINT for more info) WRT54GS v1.1 users should use standard NEWD builds
How to Flash
Make sure to get all the files you need first. Start with dd-wrt.v24_mini_generic.bin
- Perform a Hard_reset_or_30/30/30 reset
- Upload dd-wrt through the firmware update page
- WAIT for at least five minutes before you continue! (longer is better) Give the router plenty of time to to boot.
- Perform a Hard_reset_or_30/30/30 reset
- WAIT for at least five minutes before you continue! (longer is better) Give the router plenty of time to to boot.
- Power Cycle
- Open your browser to http://192.168.1.1. Configure to your liking. Enjoy.
JTAG Recovery
JTAG:
- Erase Wholeflash x2
- Flash CFE
- Unplug Power
- Unplug JTAG Cable
TFTP
- Set Rig ip static 192.168.1.10
- Plug network cable from rig to port 1
- Plug in power
- Wait for DMZ light to do a steady pulse, When it is lit on the 3rd time click upgrade. The DMZ light must be lit when you click upgrade.
- Hard Reset 30\30\30
Other Notes
[comment added 4/25/08 by WellingtonFelix] I installed the new version "dd-wrt.v24_mega_generic.bin" over default configuration of the version "dd-wrt.v23_vpn_generic.bin" and I had no problems.
[comment added 5/7/08 by Sapremias] Flashed dd-wrt.v24_mega_generic.bin directly from linksys web interface (version WRT54GSv3_4.71.4.001_fw.bin) without issue. -Sapremias
[comment added 10/5/08 by richwillal] I installed dd-wrt v24 sp1 Mega Vintage (dd-wrt.v24-9517_VINT_mega) from stock firmware with no issues. Standard process: 1) Reset router - reset for 30 secs w/ power on 2) Upload dd-wrt 3) Reset router - reset for 30 secs w/ power on 4) Disconnect/reconnect or ipconfig /renew
[comment added 04/02/09 by tribble222] I nearly bricked my router going directly from Linksys firmware to dd-wrt.v24-11296_VINT_STD.bin. Pinged on boot but tftp wouldn't work. Router didn't even respond to JTAG. Shorting pins 5&6 with the router unplugged somehow fixed everything. From there I was able to flash to mini, then back to std.