Linksys EA6300

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 19:42, 1 October 2018 (edit)
S2s2 (Talk | contribs)
(Installation)
← Previous diff
Current revision (21:28, 6 May 2020) (edit) (undo)
Jeremywh7 (Talk | contribs)
(Finish adding info referenced from Supported Devices)
 
Line 1: Line 1:
-=Hardware [https://wikidevi.com/wiki/Linksys_EA6300_v1 Specifications]=+ '''NOTE:''' [http://techinfodepot.shoutwiki.com/wiki/Linksys_EA6300_v1 EA6300V1 hardware] with an FCC/IC ID suffix of ''EA6400'' is identical to the EA6400: see [[Linksys EA6400]].
 +'''This guide covers these very similar models: EA6200, EA6300 (with EA6300 ID), EA6350v1, & EA6350v2.'''<br>
 +These use ''linksys-ea6350/'' firmware, but the EA6350v2 requires serial flash. Reference: [https://wiki.dd-wrt.com/wiki/index.php/Supported_Devices#Linksys_.28Wireless_a.2Fb.2Fg.2Fn.2Fac.29 Supported Devices wiki].<br>
 + 
 +=Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_EA6300_v0.1 Specifications]=
[[Image:Linksys_EA6300.jpg|center]] [[Image:Linksys_EA6300.jpg|center]]
-EA6400 is identical. 
{| border="1" cellspacing="0" {| border="1" cellspacing="0"
Line 46: Line 49:
=Installation= =Installation=
-See instructions for the [[Linksys_EA6400|EA6400]]+Read the [[Firmware FAQ]]: download links are in the ''Where do I download firmware?'' section
 + 
 +'''EA6300V1''' hardware with an FCC/IC ID suffix of ''EA6400'' is identical to the EA6400, but uses '''''linksys-ea6300''''' firmware.
 +*For an FCC/IC ID suffix of ''EA6400'', see the [[Linksys EA6400]] wiki.
 + 
 +The following hardware uses '''''linksys-ea6350''''' firmware: see this [https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=286183 EA6350 forum thread].
 +*''EA6300'' hardware (no labeled version) with an FCC/IC ID suffix of ''EA6300''
 +*''EA6200''
 +*''EA6350v1''
 +*''EA6350v2'': <font color=darkred>'''this requires serial flash with [https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1111599#1111599 these instructions]'''</font>
 + 
[[Category:Linksys]] [[Category:Linksys]]
[[Category:Cisco Linksys EA Series]] [[Category:Cisco Linksys EA Series]]

Current revision

NOTE: EA6300V1 hardware with an FCC/IC ID suffix of EA6400 is identical to the EA6400: see Linksys EA6400.

This guide covers these very similar models: EA6200, EA6300 (with EA6300 ID), EA6350v1, & EA6350v2.
These use linksys-ea6350/ firmware, but the EA6350v2 requires serial flash. Reference: Supported Devices wiki.

[edit] Hardware Specifications

CPU Broadcom BCM47081A0 800 MHz
Flash ROM Spansion S34ML01G100TF100 128 MB
RAM Hynix H5PS1G63JFR-S6C 128 MB
NVRAM 60KB
2.4 Ghz Radio Broadcom BCM43217 2x2 802.11b/g/n IEEE 802.11b (up to 11Mb/s)

g (up to 54Mb/s)/n (up to 300 Mb/s)

5 Ghz Radio Broadcom BCM4352 2x2 802.11a/b/g/n/ac

& two 5 GHz amplifiers

IEEE 802.11a(up to 54Mb/s)

n (up to 300 Mb/s)

Antenna Location Internal 3
Switch BCM47081A0 (Gigabit) 4x GbE + 1 WAN
USB 1x USB 3.0

[edit] Installation

Read the Firmware FAQ: download links are in the Where do I download firmware? section

EA6300V1 hardware with an FCC/IC ID suffix of EA6400 is identical to the EA6400, but uses linksys-ea6300 firmware.

The following hardware uses linksys-ea6350 firmware: see this EA6350 forum thread.

  • EA6300 hardware (no labeled version) with an FCC/IC ID suffix of EA6300
  • EA6200
  • EA6350v1
  • EA6350v2: this requires serial flash with these instructions