DD-WRT Wiki talk:Community Portal

From DD-WRT Wiki

Hello.

I have a linksys wrt54g with firmware 7.00.1. I have download dd-wrt.v23 mini for upgrade, but upgrade failed. What can I do???.

dd-wrt.v23 mini versus wrt54g v6

Hello.

I have a linksys wrt54g v6 with firmware 1.02.2. I have download dd-wrt.v23 mini for upgrade, but upgrade failed. What can I do???.

you can only install the micro version. please read the wiki to find out how to install dd-wrt micro on this device. the v5/v6 needs special instructions

========================================================

December 23, 2007 User: UnraisedArc20 Content: Hello. I am trying to flash DD-WRT firmware onto my fonera router, but the firmware version is 7.2 r2. I have tried the reset button hack but it did not work. My router is about a year old, so the original firmware is 7.1 r1 I believe. How do I get back to this firmware? Thanks, Unraised

Bridge mode available for WRT300N (Linksys)?

I'm wanting to set up a bridged network using a Linksys WRT300N. I've done it using a WRT54G but before I buy the WRT300N I wondered if anyone has done this or if the bridge mode is even available for this router. Thanks. -Kapuna

P.S. The reason I want to use the WRT300N is for the extended range of the 802.11n protocol. Does the current flash (or RC or beta) support this protocol? Thanks -Kapuna (2/2/08)

have a fonera 2100 with v24 RC6.2 and is not working in router anymore

practicaly it doesen't do what it was ment to do, i mean to be a wireless router when you use the ethernet port for internet and connect wireless devices to the wlan the router can obtain ip/netmask/dns as wan and the wireless devices connected to him recieve ip from 192.168.1.100 class, and i can ping sites in the internet. but i can not open webpages, connect to messenger...nothing...am i doing something wrong?

wrt54G debrik procedure with jtag cable .... help me

Hello people

I have briked my wrt54g v.5 during the upgrade with dd-wrt firmware (the power led blinking, the reste procedure don't work, no managment page http)

I tried whit jtag cable and hairdairy... 4.8 but I' dont know the file to flash ex. cfe.bin I have create with (imgtool_nvram.exe) kernel.bin I have used (03_dd-wrt.v24_micro_generic.bin)

but the router don't work :-(

it's possible to have the sequences of file to flash cfe.bin = ???? nvram.bin = ????? kernel.bin = ????? wholeflash.bin = ?????

for the latest stable dd-wrt and is possible the original file for the linksys in the linksys site is possible to download only firmaware that i think is the kernel.bin ?

Thanks a lot

for your precious support

shivaskunk

Bridging a Linksys WRT150N to a Linksys WRT300N

I mistakenly bought the Linksys gear thinking I could configure them to connect to each other via their wireless interfaces. Then I discovered both devices only operate as Access-points with Linksys firmware.

Using dd-wrt I was able to get the Linksys WRT150N v1.1 to associate with my Linksys WRT300N v1.1 in Client Bridge mode. I can now connect hosts that don't support wireless adapters to my home network.

I followed the instructions under the Wireless Bridge page. I first flashed the 150N with dd-wrt.v24_mini_generic.bin followed by dd-wrt.v24_std_generic.bin.

I set mode to N-only on both the 150N & 300N. The 150N's IP address is 192.168.1.2 which I set manually. I am using WPA2-Personal, AES encryption and a pass-phrase.

Thank you dd-wrt team!!