D-Link DIR-868L
From DD-WRT Wiki
Revision as of 22:10, 17 December 2016 (edit) Beta990 (Talk | contribs) (→D-Link DDNS - Added link to service) ← Previous diff |
Revision as of 22:11, 17 December 2016 (edit) (undo) Beta990 (Talk | contribs) (→D-Link DDNS - tpyo) Next diff → |
||
Line 93: | Line 93: | ||
==D-Link DDNS== | ==D-Link DDNS== | ||
D-Link offers router owners a free dynamic DNS host name service (https://www.dlinkddns.com/). | D-Link offers router owners a free dynamic DNS host name service (https://www.dlinkddns.com/). | ||
- | This service | + | This service can also be enabled on the dd-wrt firmware: |
{| border="1" cellspacing="0" style="width: 100%" | {| border="1" cellspacing="0" style="width: 100%" | ||
! width="200pt" | DDNS Service | ! width="200pt" | DDNS Service |
Revision as of 22:11, 17 December 2016
Contents |
Hardware
Delivering Wi-Fi AC1750 dual band speeds with AC SmartBeam technology to your home network, the DIR-868L is the perfect solution for those looking to enjoy online gaming, multiple HD video streams, and fast file transfers – all with less wireless interference for maximum throughput.
Specifications
CPU | Broadcom BCM4708X |
---|---|
RAM | 256 MB |
Flash | 128 MB |
Switch | In BCM4708X |
Radio (2.4 GHz) | BCM4331 |
Radio (5 GHz) | BCM4360 |
Antenna Type | External (Dual Band) |
- Specifications found on Smallnetbuilder.net [1]
- This Wiki page is for the Rev A model only! (for now)
Installation Instructions
Step-by-step instructions from out-of-the-box factory firmware
DD-WRT can be flashed directly on the D-Link DIR-868L by using the D-Link web interface:
- An older factory-to-ddwrt.bin version is required to successfully upgrade when running the factory firmware. Download a factory-to-ddwrt.bin firmware between 01-20-2015-r25974 .. 05-28-2015-r27096.
- Open the dd-wrt ftp, select a year and version and finally select the router revision (e.g. dlink-dir868l-reva when HW/ver is A1, dlink-dir868l-revb when HW/ver is B1, etc.) and download the dir-868*REV*-webflash.bin firmware file. WARNING: 08-24-2016-r30471 and later are currently reported broken.
- Open the D-Link web-interface (http://192.168.0.1) in a web browser, Log In, and go to Tools -> Firmware. *Warning: only flash over an Ethernet-cable.
- Select factory-to-ddwrt.bin and click the '"Upload'"-button. When the firmware has been successfully flashed, the router will reboot, this may take up to 3 mins. If the (top) Power-LED on the front of the router keeps blinking, see Recovery mode.
- The router address should now be changed into http://192.168.1.1. You may need to set your TCP/IPv4 settings manually using 192.168.1.1 as IP address and 255.255.255.0 as Subnet mask to access the router.
- Upgrade the router (again) by using the dir-868*REV*-webflash.bin firmware. * Note: The router doesn't support Hard Reset (aka 30/30/30 reset), select Reset to default or use the Erasing NVRAM method instead.
How to restore to factory firmware
- Follow steps of Recovery Mode.
- When returned to factory firmware, navigate to Tools - System and select Restore Factory Settings.
Recovery Mode
When the Power LED keeps blinking on boot, the router has entered the recovery mode. This usually happens when flashing a firmware went wrong, or the configuration has been corrupted.
It is also possible to (force) boot into recovery mode to restore a (soft-)bricked router or flashing back to the factory firmware:
- Download the latest available firmware on the official D-Link website of the router revision.
- Unplug all cables (incl. power cable) from the router.
- Connect the router to the PC using one of the 4 switch ports.
- Set the PC TCP/IPv4 address to 192.168.0.2 and use 255.255.255.0 as the Subnet mask.
- Disable any running firewall(s), anti-virus, TCP/IPv6, etc.
- Power-on the router with a paperclip pushing the hidden reset button located on the bottom of the device for a few seconds, when the Power LED starts blinking, release the reset button.
- Open Mozilla FireFox (*other browsers doesn't seem to work correctly when trying to flash the firmware) and navigate to http://192.168.0.1.
- Upload the stock firmware, when completed the router should report to reboot.
- The router should now be running stock and accessible on the default address. (http://192.168.1.1).
Known Issues
Bad WiFi drivers
DD-WRT has multiple issues with WiFi firmware.
- WiFi connect slow: you might experience slowness connecting your device to the AP. On Android 6/7 it always hangs at "Obtaining IP address" for around 10 seconds.
- Link speed: the link speed on DD-WRT is not high as stock is. For example: DD-WRT has a link speed for 5GHz of 200Mbit/s, on stock it is 433Mbit/s. Same goes for the 2.4GHz band.
- 5GHz band issue: the 5GHz band might not pop up when you search for WiFi networks on your device or it will take a few seconds to show up. Try to manually add the wireless network instead and it should connect.
OpenVPN
If using the inbuilt OpenVPN-server in tunnel-mode, you may need to use the following firewall rules:
iptables -A INPUT -i vlan2 -m state --state NEW -p udp --dport 1194 -j ACCEPT iptables -A INPUT -i tun2 -j ACCEPT iptables -A FORWARD -i tun2 -j ACCEPT iptables -A FORWARD -i tun2 -o vlan2 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i vlan2 -o tun2 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o vlan2 -j MASQUERADE
- Note 1: Verify that the interfaces are correct by running the ifconfig command
- Note 2: You may need to adjust the above IP-address (& netmask)
The following Additional DNSMasq Options may also be needed, to stop DHCP(-service) on the tunnel-port:
interface=tun2 no-dhcp-interface=tun2
D-Link DDNS
D-Link offers router owners a free dynamic DNS host name service (https://www.dlinkddns.com/). This service can also be enabled on the dd-wrt firmware:
DDNS Service | DynDNS.org |
---|---|
Username | Your username (no email-address) |
Password | Your Password |
Hostname | <hostname>.dlinkddns.com |
Type | Dynamic |
IP Check | Yes *only when needed |
A working state should give verification messages, like this one:
Thu Jan 22 23:11:21 2015: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Thu Jan 22 23:11:21 2015: INADYN: IP read from cache file is 'x.x.x.x'. No update required.