From DD-WRT Wiki

Jump to: navigation, search

On my WHR-HP-AG108 there is no red light. I just wait a few seconds after power on and then telnet to port 9000, it worked fine.

The link to download original firmware is dead, but the instructions in worked for me.

[edit] 4 MB flash?

If it has 4 MB flash, why does 'df' on the original firmware say 8? (executed after enabling telnetd from the debug menu on original shipped firmware, Ver1.34_1.01 dated 2006/09/05)

# df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/root                 8396      8396         0 100% /