Search results

From DD-WRT Wiki

You searched for Separate_LAN_and_WLAN/it

Jump to: navigation, search

There is no page titled "Separate_LAN_and_WLAN/it". You can create this page.

For more information about searching DD-WRT Wiki, see Help.

Showing below 3 results starting with #1.


View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).

No page title matches

Page text matches

  1. Default internal device network (6,480 bytes)
    2: ... to a really quite sophisticated combination of switching and routing. This document is a concise and...
    12: ...t> to find out which one your model uses. See [[Switched_Ports|this page]] for details.
    15: ...een the newer and older, the older is enclosed in italic parenthesis.'''
    19: Within the switch entity there are defined two [http://linux-net.osdl.org...
    21: ...issing vLan tag information, it will behave as if it were a packet on the default vLan. In DD-WRT's d...
  2. Dual SSID one for public network (5,390 bytes)
    9: This worked for me on V24 release with wrt54GL
    13: ... setting added another Interface, unbrigged, and with IP of 192.168.2.1, mask of 255.255.255.0
    15: 2) In wireless security, configure the security for the second adapter.
    20: In my case it was 192.168.2.10 5 users
    38: That's it
  3. Separate LAN and WLAN (light) (2,018 bytes)
    2: This is a 'light' version of [[Separate_LAN_and_WLAN]], so if more detail is needed, refer there.
    27: ... -i br1 -p tcp --dport telnet -j REJECT --reject-with tcp-reset
    28: ...PUT -i br1 -p tcp --dport ssh -j REJECT --reject-with tcp-reset
    29: ...PUT -i br1 -p tcp --dport www -j REJECT --reject-with tcp-reset
    30: ...T -i br1 -p tcp --dport https -j REJECT --reject-with tcp-reset </pre>

View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for