Empty JFFS=Full?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
DocTauri
DD-WRT Novice


Joined: 24 Jun 2006
Posts: 45

PostPosted: Sun Dec 31, 2006 15:31    Post subject: Empty JFFS=Full? Reply with quote
I just upgraded my WRT54GL from SP1 to SP2 with dd-wrt.v23_vpn_wrt54g.bin, erased the settings and cleaned the jffs. When I went to add my tools back to the jffs directory, nothing would write. I did a df and realized that it's full, even though it's empty. According to df, /jffs is 302k, and 100% full, with no files.

Any idea how to get past this?

Thanks,
Doc
Sponsor




Joined: 01 Jan 1970
Posts:

PostPosted: Sun Dec 31, 2006 15:34    Post subject: Reply with quote
DD-WRT ist bloated. Try standard nokaid version or switch over to OpenWrt WhiteRussian and webif^2. Use the ImageBuilder to include OpenVPN into the SquashFS part of the image. In OpenWrt / is fully writable...
anectine17
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1536
Location: Idaho

PostPosted: Mon Jan 01, 2007 5:49    Post subject: Reply with quote
Timbuktu wrote:
DD-WRT ist bloated. Try standard nokaid version or switch over to OpenWrt WhiteRussian and webif^2. Use the ImageBuilder to include OpenVPN into the SquashFS part of the image. In OpenWrt / is fully writable...


What's bloated is YOUR EGO!!

Where's the tutorial outlining how to do all this fancy ass stuff you tell people to "just do" ???

_________________
Clear 4G Wimax.
Linksys WRT54G-TM w/14929 std-nokaid, fan-cooled, 2 GB SD mod, Primary Router.
Linksys WRT54G v.3 w/15230 std-nokaid, Client Bridge.
Linksys E2000 w/15200 "Big"
Linksys WRT54G v.4
La Fonera 2100, fan-cooled
Linksys WRT54G v.3.1
Linksys WRT54G v.1.1
Linksys WRT54GS v.1
2x Linksys WRT54G v.2.2

Peacock Thread - READ THOROUGHLY
DocTauri
DD-WRT Novice


Joined: 24 Jun 2006
Posts: 45

PostPosted: Tue Jan 02, 2007 1:49    Post subject: Reply with quote
Regardless of any bloat, it says I have a 302k jffs partition which, upon cleaning, is full (and contains only a tmp directory). 302k is more than enough for what I want to do, all I want to know is how to empty it.

Thanks,
Doc
vincec
DD-WRT Novice


Joined: 24 Jul 2006
Posts: 6

PostPosted: Thu Jan 25, 2007 22:35    Post subject: Reply with quote
I'm getting the same thing

Running version:
Firmware: DD-WRT v23 SP2 (09/15/06) vpn

any ideas on how to empty jffs2?

tried the web interface options as well as setting the nv params manually like this:

Code:

nvram set jffs_mounted=1
nvram set enable_jffs2=1
nvram set sys_enable_jffs2=1
nvram set clean_jffs2=1
nvram set sys_clean_jffs2=1
nvram commit

reboot


it still says it's 100% used.

Any ideas?

Also I have a WRT54GL.. so i should have more than enough memory.
jkk
DD-WRT Novice


Joined: 06 Dec 2006
Posts: 42
Location: Tokyo, Japan

PostPosted: Fri Jan 26, 2007 2:08    Post subject: Reply with quote
vincec wrote:
I have a WRT54GL.. so i should have more than enough memory.
You only have 4mb of flash memory. You'll have to switch to dd-wrt micro or nokaid version, or use samba.
_________________
Buffalo WZR-HP-G54 (JP) w/DD-WRT v24 RC-7 (04/24/0Cool std
Buffalo WZR-HP-G54 (TW) w/DD-WRT v24 beta (05/16/07) std
Buffalo WHR2-G54 (JP) w/DD-WRT v24 beta (05/16/07) std
D-Link DI-524 Rev.C Firmware 3.23
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6868
Location: Dresden, Germany

PostPosted: Fri Jan 26, 2007 2:31    Post subject: Reply with quote
jkk wrote:
vincec wrote:
I have a WRT54GL.. so i should have more than enough memory.
You only have 4mb of flash memory. You'll have to switch to dd-wrt micro or nokaid version, or use samba.


not micro, but mini. micro wont support the jffs filesystem

_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.14.8 #42 SMP PREEMPT Thu Dec 21 18:11:16 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear R7800
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum