Samba in build 15962 BS Question

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Fri Jan 28, 2011 18:17    Post subject: Samba in build 15962 BS Question Reply with quote
I have set up samba in 15962-mega with user1, user2 and public share and it's working to 90% but it'a always a "BUT".
From my vista computer i don't need to give user/password to browse public folder.
When I tested from my windows 7 ultimate I have to set user/password to reach public folder.
I have read somewhere that is a win7 problem. Have someone any solution to this problem in win7?

"Send NTLMv2 response only\refuse LM & NTLM" <IS NOT DEFINED>

Code:
[global]
server string = rt-n16
workgroup = workgroup               
interfaces = br*      
bind interfaces only = yes
map to guest = Bad User
smb passwd file = /var/samba/smbpasswd
private dir = /var/samba
passdb backend = smbpasswd
log file = /var/smbd.log
max log size = 1000
printing = none
load printers = no
usershare allow guests = yes
socket options = TCP_NODELAY IPTOS_LOWDELAY

[public]
comment = shared mapp
path = /mnt/public
read only = no
guest ok = yes
guest only = yes 
writeable = yes
force user = root

[User1]
comment = protected mapp
path = /mnt/mine map
read only = no
guest ok = no
valid users = user1
force user = root

[User2]
comment = protected mapp
path = /mnt/yours map
read only = no
guest ok = no
valid users = user2
force user = root

_________________
[I prefer answere in whole sentence]
Sponsor
Masterman
DD-WRT Guru


Joined: 24 Aug 2009
Posts: 2070
Location: South Florida

PostPosted: Fri Jan 28, 2011 19:57    Post subject: Reply with quote
When are you going to listen to me and install OTRW?

Go ahead and pull your hair out Laughing :

http://wiki.samba.org/index.php/Windows7

_________________
Optware, the Right Way
Asus RT-AC68U
Asus RT-N66U
Asus RT-N10
Asus RT-N12
Asus RT-N16 x5
Asus WL520gU
Engenious ECB350
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
SonicWall NSA220W
SonicWall TZ215W
SonicWall TZ205W
SonicWall TZ105W
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Fri Jan 28, 2011 22:55    Post subject: Reply with quote
Masterman wrote:
When are you going to listen to me and install OTRW?

Quote:
Thanks, I havent't any glossary yet working on that Laughing


Which version of Samba is't in build 15962-mega ?
I have only two lines in "smbpasswd" user1/2 is it possible to set some pw to public ?

If I just put ex: user: "a" password: "a" then I can reach public,
>>> How to set a blank password to public ??? <<<

I have set this in windows 7:
Code:
HKLM\System\CCS\Services\LanmanWorkstation\Parameters
            DWORD  DomainCompatibilityMode = 1
            DWORD  DNSNameResolutionRequired = 0


Have set "Network security: LAN Manager authentication level" to "1"

I still get login "windows security" and "assign networkpassword"
When I try to reach "public map" must I give password to user1 or user2 to reach public map.

_________________
[I prefer answere in whole sentence]
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Sun Jan 30, 2011 7:44    Post subject: Reply with quote
| _ U .^ .P _ |
_________________
[I prefer answere in whole sentence]
wrtabuser
DD-WRT User


Joined: 15 Dec 2009
Posts: 121

PostPosted: Sun Jan 30, 2011 10:16    Post subject: Reply with quote
Code:
root@RT-N16:~# smbd -V
Version 2.2.12

Works fine for me in win7 but I don't use any "custom configuration", just have filled basic settings in.
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Wed Feb 02, 2011 18:26    Post subject: Reply with quote
@masterman @Frater

Have you tested in OTRW Samba with passwordprotected map(s) in Samba 3.5 ?

If it's working I consider to install OTRW in this weekend Laughing

_________________
[I prefer answere in whole sentence]
ndewan
DD-WRT Guru


Joined: 14 Jan 2010
Posts: 553

PostPosted: Wed Feb 02, 2011 19:07    Post subject: Reply with quote
FWIW, i have otrw 3.5.6 installed. Very vanilla setup. No complex password maps ..

I was using Win Vista clients to access the shares. I have since upgraded to Win 7. I did NOT have to do anything to the registry to restore access to the shares. I am using Win7Ultimate/HomePremuim, that may have played a role in not needing the registry changes.

Took a little while, back on forth on the forum Shocked to get the 3.5.6 version working. In hindsight, it should have been relatively painless. Now that I have it, I have since updated my cheatsheets and have have actually helped others on this forum get their setup working.

Let me know if you need help.

_________________
===================================
1 * DIR-866L - 29193 Mega (Main Gateway)
1 * EA4200 - 29193 Mega (Main Gateway)
1 * EA6500 - 29193 Mega (Repeater Bridge)
1 * EA6500v2 - 29193 Mega (Repeater Bridge)
1 * WRT610N - 29193 Mega (Repeater Bridge)
===================================
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Wed Feb 02, 2011 19:23    Post subject: Reply with quote
Okey
I consider to use OTRW because I don't get it to work with my setup in build 15962-mega on top post.
I have to give "some" password on first shot and after that all working.
Maby you have any solution om that?

_________________
[I prefer answere in whole sentence]
ndewan
DD-WRT Guru


Joined: 14 Jan 2010
Posts: 553

PostPosted: Wed Feb 02, 2011 19:27    Post subject: Reply with quote
i am on 15962-mega too but for e3000's.

I used the root/<router password>. I think, I had to enter it once, but that was it. Have had several client reboots since and connectivity is seamless.

go ahead .. walk on the wild side .. Wink

_________________
===================================
1 * DIR-866L - 29193 Mega (Main Gateway)
1 * EA4200 - 29193 Mega (Main Gateway)
1 * EA6500 - 29193 Mega (Repeater Bridge)
1 * EA6500v2 - 29193 Mega (Repeater Bridge)
1 * WRT610N - 29193 Mega (Repeater Bridge)
===================================
ndewan
DD-WRT Guru


Joined: 14 Jan 2010
Posts: 553

PostPosted: Wed Feb 02, 2011 19:48    Post subject: Reply with quote
Take a read on this thread..

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=87232

There are others on the same build, win7 OS that dont need passwords to access shares. Although in this case the person wants to have the security .. understandably..

_________________
===================================
1 * DIR-866L - 29193 Mega (Main Gateway)
1 * EA4200 - 29193 Mega (Main Gateway)
1 * EA6500 - 29193 Mega (Repeater Bridge)
1 * EA6500v2 - 29193 Mega (Repeater Bridge)
1 * WRT610N - 29193 Mega (Repeater Bridge)
===================================
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum