EOC2611P - Entered Redboot but flash fails

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices
Author Message
remco.kortekaas
DD-WRT Novice


Joined: 22 Jan 2011
Posts: 2

PostPosted: Sat Jan 22, 2011 14:22    Post subject: EOC2611P - Entered Redboot but flash fails Reply with quote
Hi all,

I'm trying to recover from a failed dd-wrt firmware upgrade (power failure during flash).

I succesfully entered the Redboot shell following the instructions in the sticky.

I download the EOC2610 linux.bin image (I have a 2611P device which should be compatible).

RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

13. Download the image from TFTP server and copy into memory
RedBoot> load -r -b 0x80041000 linux.bin
Using default protocol (TFTP)
-
Raw file loaded 0x80041000-0x80663fff, assumed entry at 0x80041000

14. Create a partition in flash
RedBoot> fis create linux
Note: This step will take about 10~15 minutes to complete, please wait patiently.
... Erase from 0xa8030000-0xa8653000: .....................................
... Program from 0x80041000-0x80664000 at 0xa8030000: .................



Step 14 fails: "Can't program region at 0xa8070000: Unknown error"

Any help would be appreciated getting past this issue.

Many thanks,
Remco.
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Sun Jan 23, 2011 11:22    Post subject: Reply with quote
try

Code:
fis init -f

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
remco.kortekaas
DD-WRT Novice


Joined: 22 Jan 2011
Posts: 2

PostPosted: Sun Jan 23, 2011 20:31    Post subject: Thanks Reply with quote
that helped a lot!

Many thanks, Remco.
fsjis1
DD-WRT Novice


Joined: 12 May 2012
Posts: 1

PostPosted: Sat May 12, 2012 18:27    Post subject: Help... thanks Reply with quote
I have an engenius eoc2611p. The device wont let me into it, I tried reseting it using the physical button but that still doesnt seem to work. The device was working just fine, but I wanted to move to a different location and have it connect to a different access point, so I just pushed the button to reset.

I am now looking on the internets for help. I saw that you were talking about recovering from a bad flash, and I would like some help doing that. I do not know where the documentation you are talking about is. Any help would be greatly appreciated.

I can ping the device for about 2 seconds or less when it boots up, but that is all. after that nothing.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Sun May 13, 2012 20:03    Post subject: Reply with quote
read:
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
eoc2611p
DD-WRT Novice


Joined: 05 Dec 2012
Posts: 23

PostPosted: Wed Jan 16, 2013 13:49    Post subject: Re: EOC2611P - Entered Redboot but flash fails Reply with quote
remco.kortekaas wrote:

I download the EOC2610 linux.bin image (I have a 2611P device which should be compatible).



Hi Remco,
I also have a EOC2611P, would you be so kind to post the "linux.bin" file here?
I am looking for it everywhere but i can't find it, the only thing available was the original firmware in .img format, thanks.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Wed Jan 16, 2013 15:23    Post subject: Reply with quote
just start reading this:
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum