Asus RT-N66U

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 80, 81, 82 ... 167, 168, 169  Next
Author Message
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Sun Dec 16, 2012 22:06    Post subject: Reply with quote
barryware wrote:
shrewd wrote:
Barryware seems to be down, can I download the firmware from anywhere else?

it seems that my ddns provider is having a problem..

use my wan ip of:

64.233.210.174

instead of my domain..

sorry for the inconvenience..


ddns is up and working so you can access by my domain.. barryware.net

_________________
[Moderator Deleted] Shocked
Sponsor
AlexHighTower
DD-WRT User


Joined: 16 Aug 2011
Posts: 69

PostPosted: Mon Dec 17, 2012 9:55    Post subject: Reply with quote
Hello again,

in addition to my problem with build 20363...
I made 30/30/30 reset and router start to work, BUT:

- wifi 5HZ still doesn't work ((((

- router client can access internel, but router itself - not fully... dns/ping - work, but telnet - no... wget - no... so I can't install optware (((

_________________
TP-Link TL-WR1043ND: DD-WRT v24-sp2 (08/07/10) std - build 14896
Asus RT-N16: DD-WRT build 19545 (kingmod)
AlexHighTower
DD-WRT User


Joined: 16 Aug 2011
Posts: 69

PostPosted: Mon Dec 17, 2012 12:32    Post subject: Reply with quote
Also I have problems with microsd card installed into embedded socket on main board...

Quote:

Dec 17 16:27:45 DD-WRT kern.err kernel: ehci_hcd 0000:00:04.1: fatal error
Dec 17 16:27:45 DD-WRT kern.err kernel: ehci_hcd 0000:00:04.1: force halt; handshake b8004014 00004000 00004000 -> -145
Dec 17 16:27:45 DD-WRT kern.err kernel: ehci_hcd 0000:00:04.1: HC died; cleaning up
Dec 17 16:27:45 DD-WRT kern.info kernel: sd 0:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00
Dec 17 16:27:45 DD-WRT kern.warn kernel: end_request: I/O error, dev sda, sector 198656
Dec 17 16:27:45 DD-WRT kern.err kernel: Buffer I/O error on device sda1, logical block 24576
Dec 17 16:27:45 DD-WRT kern.warn kernel: lost page write due to I/O error on sda1
Dec 17 16:27:45 DD-WRT kern.err kernel: Buffer I/O error on device sda1, logical block 24577
Dec 17 16:27:45 DD-WRT kern.warn kernel: lost page write due to I/O error on sda1
Dec 17 16:27:45 DD-WRT kern.err kernel: Buffer I/O error on device sda1, logical block 24578
Dec 17 16:27:45 DD-WRT kern.warn kernel: lost page write due to I/O error on sda1
Dec 17 16:27:45 DD-WRT kern.err kernel: Buffer I/O error on device sda1, logical block 24579
Dec 17 16:27:45 DD-WRT kern.warn kernel: lost page write due to I/O error on sda1
Dec 17 16:27:45 DD-WRT kern.err kernel: Buffer I/O error on device sda1, logical block 24580
Dec 17 16:27:45 DD-WRT kern.info kernel: usb 1-1: USB disconnect, address 2
Dec 17 16:27:45 DD-WRT kern.info kernel: usb 1-1.4: USB disconnect, address 3
Dec 17 16:27:45 DD-WRT kern.err kernel: Aborting journal on device sda1.
Dec 17 16:27:45 DD-WRT kern.warn kernel: __journal_remove_journal_head: freeing b_committed_data
Dec 17 16:27:45 DD-WRT kern.crit kernel: ext3_abort called.
Dec 17 16:27:45 DD-WRT kern.crit kernel: EXT3-fs error (device sda1): ext3_journal_start_sb: Detected aborted journal
Dec 17 16:27:45 DD-WRT kern.crit kernel: Remounting filesystem read-only
Dec 17 16:27:45 DD-WRT kern.err kernel: Buffer I/O error on device sda1, logical block 1
Dec 17 16:27:45 DD-WRT kern.warn kernel: lost page write due to I/O error on sda1
Dec 17 16:27:45 DD-WRT kern.err kernel: Buffer I/O error on device sda1, logical block 942
Dec 17 16:27:45 DD-WRT kern.warn kernel: lost page write due to I/O error on sda1
Dec 17 16:27:45 DD-WRT kern.err kernel: Buffer I/O error on device sda1, logical block 943
Dec 17 16:27:45 DD-WRT kern.warn kernel: lost page write due to I/O error on sda1
Dec 17 16:27:45 DD-WRT kern.info kernel: usb 2-1: new full speed USB device using ohci_hcd and address 2
Dec 17 16:27:46 DD-WRT kern.info kernel: usb 2-1: not running at top speed; connect to a high speed hub
Dec 17 16:27:45 DD-WRT kern.err kernel: ehci_hcd 0000:00:04.1: fatal error
Dec 17 16:27:46 DD-WRT kern.info kernel: hub 2-1:1.0: USB hub found
Dec 17 16:27:46 DD-WRT kern.info kernel: hub 2-1:1.0: 4 ports detected
Dec 17 16:27:46 DD-WRT kern.info kernel: usb 2-1.4: new full speed USB device using ohci_hcd and address 3
Dec 17 16:27:46 DD-WRT kern.info kernel: usb 2-1.4: not running at top speed; connect to a high speed hub
Dec 17 16:27:46 DD-WRT kern.info kernel: usb 2-1.4: configuration #1 chosen from 1 choice
Dec 17 16:27:46 DD-WRT kern.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Dec 17 16:27:46 DD-WRT kern.err kernel: scsi 0:0:0:0: rejecting I/O to dead device
Dec 17 16:27:46 DD-WRT kern.crit kernel: EXT3-fs error (device sda1): ext3_find_entry: reading directory #2 offset 0
Dec 17 16:27:46 DD-WRT kern.err kernel: scsi 0:0:0:0: rejecting I/O to dead device
Dec 17 16:27:46 DD-WRT kern.crit kernel: EXT3-fs error (device sda1): ext3_find_entry: reading directory #2 offset 0
Dec 17 16:27:46 DD-WRT kern.err kernel: scsi 0:0:0:0: rejecting I/O to dead device
Dec 17 16:27:46 DD-WRT kern.crit kernel: EXT3-fs error (device sda1): ext3_find_entry: reading directory #2 offset 0
Dec 17 16:27:48 DD-WRT kern.notice kernel: scsi 1:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
Dec 17 16:27:48 DD-WRT kern.err kernel: scsi 0:0:0:0: rejecting I/O to dead device
Dec 17 16:27:49 DD-WRT kern.notice kernel: sd 1:0:0:0: [sdb] 31340544 512-byte hardware sectors (16046 MB)
Dec 17 16:27:49 DD-WRT kern.notice kernel: sd 1:0:0:0: [sdb] Write Protect is off
Dec 17 16:27:49 DD-WRT kern.debug kernel: sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Dec 17 16:27:49 DD-WRT kern.err kernel: sd 1:0:0:0: [sdb] Assuming drive cache: write through
Dec 17 16:27:49 DD-WRT kern.err kernel: sd 1:0:0:0: [sdb] Assuming drive cache: write through
Dec 17 16:27:49 DD-WRT kern.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1 p2
Dec 17 16:27:49 DD-WRT kern.notice kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
Dec 17 16:27:50 DD-WRT kern.info kernel: kjournald starting. Commit interval 5 seconds
Dec 17 16:27:50 DD-WRT kern.info kernel: EXT3 FS on sdb1, internal journal
Dec 17 16:27:50 DD-WRT kern.info kernel: EXT3-fs: recovery complete.
Dec 17 16:27:50 DD-WRT kern.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 17 16:27:53 DD-WRT kern.err kernel: scsi 0:0:0:0: rejecting I/O to dead device
Dec 17 16:28:06 DD-WRT kern.err kernel: scsi 0:0:0:0: rejecting I/O to dead device
Dec 17 16:28:47 DD-WRT kern.err kernel: scsi 0:0:0:0: rejecting I/O to dead device


this card at the same place with asus stock fw worked fine, I used it to backup cfe...

_________________
TP-Link TL-WR1043ND: DD-WRT v24-sp2 (08/07/10) std - build 14896
Asus RT-N16: DD-WRT build 19545 (kingmod)
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Mon Dec 17, 2012 14:14    Post subject: Reply with quote
sdcard and usb currently not working with ext2/3
_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
xknobi
DD-WRT Novice


Joined: 25 Nov 2012
Posts: 20

PostPosted: Mon Dec 17, 2012 14:39    Post subject: Reply with quote
BasCom wrote:
sdcard and usb currently not working with ext2/3

I guess NTFS also belongs to the list, right?
damaster
DD-WRT Novice


Joined: 19 Dec 2012
Posts: 6

PostPosted: Wed Dec 19, 2012 22:10    Post subject: Reply with quote
al360ex wrote:
I'm new to all of this too. This is what I undertood I had to do so far :

1. Upgrade to the latest firmware from Asus
2. Update CFE (And don't forget to edit the CFE. Only if you forgot to backup your original.)
3. Flash NVRAM (30-30-30)
4. Flash with 20363 Mega - 64K NVRAM
5. Flash NVRAM (30-30-30)
6. Enjoy !

EDIT : If you don't need the 64K NVRAM and are ok with having only 32K NVRAM, then you can simply go here and install the "normal/Official" version of DD-WRT. Be sure however to download the one for your router (RT-N66)

You can also read the DD-WRT wiki for the RT-N66U.


If I have a brand new router and update to the latest Asus firmware, and then run the cfe_update script, will that take care of backing up my old CFE?
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Wed Dec 19, 2012 22:12    Post subject: Reply with quote
xknobi wrote:
BasCom wrote:
sdcard and usb currently not working with ext2/3

I guess NTFS also belongs to the list, right?


I have been able to use NTFS and FAT32 both on my n66u

-Fractal
Thireus
DD-WRT User


Joined: 12 Mar 2009
Posts: 93

PostPosted: Wed Dec 19, 2012 22:18    Post subject: Re: Issue Reply with quote
Thank you Crypticone for your report. I think it is the same issue, only MacOS and probably some specific devices can scan and discover a 00:00:00 access point mac address :/. Have you fixed the issue?

Crypticone wrote:
I have an issue that might be the same as yours. Same build and configured as repeater mode. Primary wlan link stays connected and still routes correctly to Ethernet ports. Typically while streaming Netflix to a WD TV live box, the entire virtual network disappears. No SSID showing up, all connected devices dropped. I have not checked the Mac address while this issue is happening. Rebooting does not seem to fix the issue but powering down and back up seems to correct it. I don't stream too often but it seems to happen most while trying to.

Using Fractal 20202 mega with CFE 64k, the middle one (12-2) not the newest one (12-4).


Crypticone

Thireus wrote:
Hi everyone,

I have a big issue to report:

I'm using Fractal 64k build on my Asus RT-N66U B1 router with repeater mode enabled for the 2.4GHz Antenna. I also have created a virtual Access Point on the 2.4GHz antenna and after a random period of time the MAC address of this virtual AP changes definitely to 00:00:00:00:00:00 (this issue is only for the Virtual Mac AP, not the Physical Mac AP).

DD-WRT v24-sp2 (10/31/12) mega - build 20202

Anyone has the same issue? How can I fix this? Any ways to fix the mac adress?

Thanks.

_________________
www.DareYourMind.net
al360ex
DD-WRT Novice


Joined: 14 Dec 2012
Posts: 15
Location: Québec, Canada

PostPosted: Thu Dec 20, 2012 0:57    Post subject: Reply with quote
damaster wrote:
If I have a brand new router and update to the latest Asus firmware, and then run the cfe_update script, will that take care of backing up my old CFE?


Yes if you read carefully the 3rd point on SmallNetBuilder :
ryzhov_al wrote:
3. Saving old CFE image
Please consider saving your old CFE. A ./cfe.old file will be placed in the same dir with update script, save it to some safe place.

_________________
Passion rules reason, for better or for worse...
So stop tearing your hair out, take a deep breath and find the solution to your problem Wink
AlexHighTower
DD-WRT User


Joined: 16 Aug 2011
Posts: 69

PostPosted: Thu Dec 20, 2012 6:54    Post subject: Reply with quote
and how to make 5GHz wifi network to work on build 20363?
on stock fw it works... may be some additional configuration needed or region specific channel selection or whatever?

_________________
TP-Link TL-WR1043ND: DD-WRT v24-sp2 (08/07/10) std - build 14896
Asus RT-N16: DD-WRT build 19545 (kingmod)
damaster
DD-WRT Novice


Joined: 19 Dec 2012
Posts: 6

PostPosted: Thu Dec 20, 2012 18:29    Post subject: Reply with quote
al360ex wrote:
damaster wrote:
If I have a brand new router and update to the latest Asus firmware, and then run the cfe_update script, will that take care of backing up my old CFE?


Yes if you read carefully the 3rd point on SmallNetBuilder :
ryzhov_al wrote:
3. Saving old CFE image
Please consider saving your old CFE. A ./cfe.old file will be placed in the same dir with update script, save it to some safe place.


Dumb question probably: but how do I get the backed up cfe.old from the router to my computer? I ran the script, and the CFE update was successful. I just now want to make sure I back up that file before proceeding with DD-WRT.
damaster
DD-WRT Novice


Joined: 19 Dec 2012
Posts: 6

PostPosted: Thu Dec 20, 2012 18:43    Post subject: Reply with quote
damaster wrote:
al360ex wrote:
damaster wrote:
If I have a brand new router and update to the latest Asus firmware, and then run the cfe_update script, will that take care of backing up my old CFE?


Yes if you read carefully the 3rd point on SmallNetBuilder :
ryzhov_al wrote:
3. Saving old CFE image
Please consider saving your old CFE. A ./cfe.old file will be placed in the same dir with update script, save it to some safe place.


Dumb question probably: but how do I get the backed up cfe.old from the router to my computer? I ran the script, and the CFE update was successful. I just now want to make sure I back up that file before proceeding with DD-WRT.


Never mind: I ran tftpd on Windows and did a tftp transfer of cfe.old and cfe.new from the router to my computer.

On to flashing now...
Jonathan
DD-WRT User


Joined: 12 Jan 2007
Posts: 87

PostPosted: Thu Dec 20, 2012 22:04    Post subject: Reply with quote
damaster wrote:
damaster wrote:
al360ex wrote:
damaster wrote:
If I have a brand new router and update to the latest Asus firmware, and then run the cfe_update script, will that take care of backing up my old CFE?


Yes if you read carefully the 3rd point on SmallNetBuilder :
ryzhov_al wrote:
3. Saving old CFE image
Please consider saving your old CFE. A ./cfe.old file will be placed in the same dir with update script, save it to some safe place.


Dumb question probably: but how do I get the backed up cfe.old from the router to my computer? I ran the script, and the CFE update was successful. I just now want to make sure I back up that file before proceeding with DD-WRT.


Never mind: I ran tftpd on Windows and did a tftp transfer of cfe.old and cfe.new from the router to my computer.

On to flashing now...


I used a USB flash drive.
damaster
DD-WRT Novice


Joined: 19 Dec 2012
Posts: 6

PostPosted: Fri Dec 21, 2012 3:43    Post subject: Reply with quote
Managed to flash fractal's build 20363 after doing the CFE update. All was working well, but the range on the 5 GHz radio wasn't as good as I had hoped it would be. Honestly though, I never tried the stock firmware so can't say if it's a DD-WRT issue.

I then tried Shibby's Tomato build 1.28 for 64k CFE and as it was my first foray with Tomato, I actually preferred the UI over DD-WRT. Sadly, there was no improvement on the 5 GHz range and the QoS settings are horribly complicated in Tomato as compared to DD-WRT.

I'm going to try going back to stock to test the 5 GHz range and then will most likely eventually switch back to DD-WRT since I need the bandwidth monitoring, QoS, static DNS, DDNS, etc.
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Fri Dec 21, 2012 10:51    Post subject: Reply with quote
dont expect high range on 5ghz. ist has less than 2,4 ghz
_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Goto page Previous  1, 2, 3 ... 80, 81, 82 ... 167, 168, 169  Next Display posts from previous:    Page 81 of 169
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum