15334 released

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3  Next
Author Message
danne99se
DD-WRT Novice


Joined: 14 Feb 2010
Posts: 28
Location: Tokyo

PostPosted: Sat Oct 02, 2010 12:58    Post subject: 15334 released Reply with quote
I just upgraded my WZR-HP-G300NH to 15334. Upgrade was smooth and everything working fine so far.

http://www.dd-wrt.com/site/support/other-downloads?path=others%2Feko%2FBrainSlayer-V24-preSP2%2F10-02-10-r15334%2F
Sponsor
madiori
DD-WRT Novice


Joined: 14 Aug 2010
Posts: 26

PostPosted: Sat Oct 02, 2010 14:03    Post subject: Reply with quote
If the USB issue have been fixed in this release?
If you could access your external USB disk or device on this build?
danne99se
DD-WRT Novice


Joined: 14 Feb 2010
Posts: 28
Location: Tokyo

PostPosted: Sat Oct 02, 2010 14:55    Post subject: Reply with quote
I have not yet used USB. Just tried now to get it working but I cant. However Im not sure if I do the right steps to get USB working.

Can you please share the steps that I need to do? Then I can test it.

This is what I get on df command. No USB there...

root@DD-WRT-ATRIA:/etc# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 11.1M 11.1M 0 100% /
none 512.0K 0 512.0K 0% /dev
danne99se
DD-WRT Novice


Joined: 14 Feb 2010
Posts: 28
Location: Tokyo

PostPosted: Sat Oct 02, 2010 15:28    Post subject: Reply with quote
After that I upgraded to 15334 I could see 300 Mbps for about 5 minutes, then it dropped to 130 Mbps and it seems like it will not go up to 300 Mbps again.

What is the latest news on getting 300 Mbps speed over WiFi with the WZR-HP-G300NH?
deathnite
DD-WRT User


Joined: 11 Nov 2008
Posts: 130

PostPosted: Sat Oct 02, 2010 17:40    Post subject: Reply with quote
madiori wrote:
If the USB issue have been fixed in this release?
If you could access your external USB disk or device on this build?

The issue is still present in this build.

_________________
▲ ACTIVE ▲
[Broadcom ARM64] ASUS RT-AC86U v? --802.11ac wave 2-- RT-AC86U Thread | ASUSWRT-Merlin 384.18-Kernel-4.1.27

▼ INACTIVE ▼
[Broadcom ARM] ASUS RT-AC56U v2.00 --802.11ac-- dd-wrt v24-SP2-r23919 | RT-AC56U Thread | ASUSWRT-Merlin 384.6-Kernel-2.6
[Atheros MIPS] Linksys WRT160NL v1.0 --802.11n-- dd-wrt v24-SP2-r20675 | WRT160NL Thread | OpenWrt Barrier Breaker 14.07 r40477-Kernel-3.10
madiori
DD-WRT Novice


Joined: 14 Aug 2010
Posts: 26

PostPosted: Sat Oct 02, 2010 18:22    Post subject: Reply with quote
deathnite wrote:
madiori wrote:
If the USB issue have been fixed in this release?
If you could access your external USB disk or device on this build?

The issue is still present in this build.


thanks,then have to wait next build to see if could fix this issue.
Pharaoh
DD-WRT User


Joined: 12 Aug 2006
Posts: 485

PostPosted: Sat Oct 02, 2010 19:04    Post subject: Reply with quote
In other respects this build improves much on the wireless end.
Both 5ghz and 2.4ghz are showing more normal signal levels and seem to resetting correctly now although only time shall tell for sure.
Speed is good and it seems stable.
ccdoggy
DD-WRT User


Joined: 30 Aug 2009
Posts: 455

PostPosted: Sat Oct 02, 2010 19:12    Post subject: Reply with quote
madiori wrote:
deathnite wrote:
madiori wrote:
If the USB issue have been fixed in this release?
If you could access your external USB disk or device on this build?

The issue is still present in this build.


thanks,then have to wait next build to see if could fix this issue.


For an explanation and clarification. The mounting issue is dealing with the web based mounting system. with the new kernel it changed something in the mounting scheme and so i guess it fails. If you ssh or telnet into the router you can still mount any attached drives/devices.

Mounting itself is not broken, its the web interface for easy mounting.

_________________
WNDR3700 moved to openwrt
- my Wireless settings which (300 on 5.0) Wireless Config

Atheros wireless settings Here

WNDR3700 Wiki

OpenVPN configuration I have refined: OpenVPN Config

ALL WNDR3700 users please fill out this short Poll
deathnite
DD-WRT User


Joined: 11 Nov 2008
Posts: 130

PostPosted: Sat Oct 02, 2010 20:09    Post subject: Reply with quote
ccdoggy wrote:
madiori wrote:
deathnite wrote:
madiori wrote:
If the USB issue have been fixed in this release?
If you could access your external USB disk or device on this build?

The issue is still present in this build.


thanks,then have to wait next build to see if could fix this issue.


For an explanation and clarification. The mounting issue is dealing with the web based mounting system. with the new kernel it changed something in the mounting scheme and so i guess it fails. If you ssh or telnet into the router you can still mount any attached drives/devices.

Mounting itself is not broken, its the web interface for easy mounting.

Mounting a drive through either the web interface or ssh (using the old command) doesn't work since build 15279.

This command seems to work with new builds "mount /dev/sda1 /mnt".

_________________
▲ ACTIVE ▲
[Broadcom ARM64] ASUS RT-AC86U v? --802.11ac wave 2-- RT-AC86U Thread | ASUSWRT-Merlin 384.18-Kernel-4.1.27

▼ INACTIVE ▼
[Broadcom ARM] ASUS RT-AC56U v2.00 --802.11ac-- dd-wrt v24-SP2-r23919 | RT-AC56U Thread | ASUSWRT-Merlin 384.6-Kernel-2.6
[Atheros MIPS] Linksys WRT160NL v1.0 --802.11n-- dd-wrt v24-SP2-r20675 | WRT160NL Thread | OpenWrt Barrier Breaker 14.07 r40477-Kernel-3.10


Last edited by deathnite on Sun Oct 03, 2010 0:34; edited 6 times in total
AfterShock
DD-WRT User


Joined: 17 May 2010
Posts: 136

PostPosted: Sat Oct 02, 2010 22:45    Post subject: Reply with quote
will flash to this build and see if the wireless is any better or if either my usb drive or flash drive get detected, and also need the commands to mount if they are even detected
AfterShock
DD-WRT User


Joined: 17 May 2010
Posts: 136

PostPosted: Sun Oct 03, 2010 2:30    Post subject: Reply with quote
meh, still no detection with my 2 drives and nothing with a portable 500GB drive, dmesh shows a usb device has been connected and even tried the mount command incase it was just a bug where it just wasn't showing any info on the usb tab, oh well I'm back on openwrt and will wait to try it again on the next build.
ubuntu1user
DD-WRT Novice


Joined: 01 Jul 2010
Posts: 42

PostPosted: Sun Oct 03, 2010 3:18    Post subject: Reply with quote
Well--at least the wireless "seems" to be stronger/more stable---at least so far............
thorwald
DD-WRT Novice


Joined: 22 Aug 2010
Posts: 46

PostPosted: Sun Oct 03, 2010 4:35    Post subject: Reply with quote
Quote:
This command seems to work with new builds "mount /dev/sda1 /mnt".

ok - i get the USB drive to mount with this, but quite strangely, the httpd web-interface goes to shit (garbled display of the startup page, with no options) as a result of the mount command on startup.

i CAN get to the web-interface if i kill/restart httpd from putty.

tried to also put in an init.d script that restarts the httpd, but it seems to not work - runs, but doesn't help.

pointers?
deathnite
DD-WRT User


Joined: 11 Nov 2008
Posts: 130

PostPosted: Sun Oct 03, 2010 8:51    Post subject: Reply with quote
thorwald wrote:
Quote:
This command seems to work with new builds "mount /dev/sda1 /mnt".

ok - i get the USB drive to mount with this, but quite strangely, the httpd web-interface goes to shit (garbled display of the startup page, with no options) as a result of the mount command on startup.

i CAN get to the web-interface if i kill/restart httpd from putty.

tried to also put in an init.d script that restarts the httpd, but it seems to not work - runs, but doesn't help.

pointers?

I didn't experience issues with the web interface.

_________________
▲ ACTIVE ▲
[Broadcom ARM64] ASUS RT-AC86U v? --802.11ac wave 2-- RT-AC86U Thread | ASUSWRT-Merlin 384.18-Kernel-4.1.27

▼ INACTIVE ▼
[Broadcom ARM] ASUS RT-AC56U v2.00 --802.11ac-- dd-wrt v24-SP2-r23919 | RT-AC56U Thread | ASUSWRT-Merlin 384.6-Kernel-2.6
[Atheros MIPS] Linksys WRT160NL v1.0 --802.11n-- dd-wrt v24-SP2-r20675 | WRT160NL Thread | OpenWrt Barrier Breaker 14.07 r40477-Kernel-3.10
danne99se
DD-WRT Novice


Joined: 14 Feb 2010
Posts: 28
Location: Tokyo

PostPosted: Sun Oct 03, 2010 13:32    Post subject: Reply with quote
deathnite wrote:
thorwald wrote:
Quote:
This command seems to work with new builds "mount /dev/sda1 /mnt".

ok - i get the USB drive to mount with this, but quite strangely, the httpd web-interface goes to shit (garbled display of the startup page, with no options) as a result of the mount command on startup.

i CAN get to the web-interface if i kill/restart httpd from putty.

tried to also put in an init.d script that restarts the httpd, but it seems to not work - runs, but doesn't help.

pointers?

I didn't experience issues with the web interface.


Thanks for the mount command. It worked fine for me too. No problems with Web GUI either.
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum