Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Tue Oct 12, 2010 2:19 Post subject: Bricked 310n - Talk me out of pinshorting![Split] (solved)
hello everyone, i have bricked my 310n v1. ive tried all suggestions and nothing the only thing left which ive tried on a wrt150n and was able to bring it back from bricked state was shorting. i don't know where the chip is located, can anyone help? _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
Last edited by lceron on Thu Oct 14, 2010 3:49; edited 1 time in total
Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Tue Oct 12, 2010 2:43 Post subject:
what do you mean fixing it for 3.00 ? i think i found it, it is under the board it is an eon chip, right? _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
Joined: 06 Mar 2009 Posts: 107 Location: MinneSOTA!
Posted: Tue Oct 12, 2010 3:09 Post subject:
tomatousb now supports the wrt310n, I helped the dev support the device using my unit. Has been supported sense beta 50. _________________ My Hardware:
1x WNDR3300 - 14853 NEWD C/AP Mini-HotSpot-Kaid
1x WRT54G2 - 13577 NEWD RB Micro
1x WRT310N - TomatoUSB Dev Test Build 9-22-10
1x RT-N16 - TomatoUSB SVN Build 9-13-10
Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Tue Oct 12, 2010 3:23 Post subject:
i know, i flashed the standard build k26 not the usb one which you are suggesting. another newbie error for not reading i guess. i have flashed my wrt54gs unit which is running great, but not the 310n _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Tue Oct 12, 2010 4:14 Post subject:
success, i have brought it back from "brickness"
@ previous poster, can you please point me to the right file, for the tomato firmware? _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Wed Oct 13, 2010 15:24 Post subject:
thanks for your help, ddggttff3. how do i close or mark this post as solved? _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
Joined: 06 Mar 2009 Posts: 107 Location: MinneSOTA!
Posted: Wed Oct 13, 2010 15:33 Post subject:
edit your first post, change the title and add [Solved] to the front of it. _________________ My Hardware:
1x WNDR3300 - 14853 NEWD C/AP Mini-HotSpot-Kaid
1x WRT54G2 - 13577 NEWD RB Micro
1x WRT310N - TomatoUSB Dev Test Build 9-22-10
1x RT-N16 - TomatoUSB SVN Build 9-13-10