Bricked 310n - Talk me out of pinshorting![Split] (solved)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
lceron
DD-WRT User


Joined: 19 May 2007
Posts: 283
Location: Los Angeles, CA USA

PostPosted: Tue Oct 12, 2010 2:19    Post subject: Bricked 310n - Talk me out of pinshorting![Split] (solved) Reply with quote
hello everyone, i have bricked my 310n v1. ive tried all suggestions and nothing the only thing left which ive tried on a wrt150n and was able to bring it back from bricked state was shorting. i don't know where the chip is located, can anyone help?
_________________
e3200 stock <- waiting for support
wrt400n v26 std with modded antennas


Last edited by lceron on Thu Oct 14, 2010 3:49; edited 1 time in total
Sponsor
ReadtheAnnouncements!
DD-WRT Guru


Joined: 02 Mar 2010
Posts: 1362

PostPosted: Tue Oct 12, 2010 2:27    Post subject: Reply with quote
Is it cheaper to fix the router for 3.00 or ruin it for free?

Peacock, note 6. If you've tried "everything" and it hasn't worked, pin shorting won't either.

_________________
If I've said it once, I've must have said it a thousand times! READ the announcements at the start of the broadcom forum!
THESE:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=54889
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=54845
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=52043
(We'll wait....!) Wink
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock

PostPosted: Tue Oct 12, 2010 2:41    Post subject: Reply with quote
Out of curiosity, what did you do to brick the unit?
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
lceron
DD-WRT User


Joined: 19 May 2007
Posts: 283
Location: Los Angeles, CA USA

PostPosted: Tue Oct 12, 2010 2:43    Post subject: Reply with quote
what do you mean fixing it for 3.00 ? i think i found it, it is under the board it is an eon chip, right?
_________________
e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
lceron
DD-WRT User


Joined: 19 May 2007
Posts: 283
Location: Los Angeles, CA USA

PostPosted: Tue Oct 12, 2010 2:45    Post subject: Reply with quote
kinda embarassing, trying out tomato firmware...
_________________
e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
ddggttff3
DD-WRT User


Joined: 06 Mar 2009
Posts: 107
Location: MinneSOTA!

PostPosted: Tue Oct 12, 2010 3:09    Post subject: Reply with quote
tomatousb now supports the wrt310n, I helped the dev support the device using my unit. Has been supported sense beta 50.
_________________
My Hardware:
1x WNDR3300 - 14853 NEWD C/AP Mini-HotSpot-Kaid
1x WRT54G2 - 13577 NEWD RB Micro
1x WRT310N - TomatoUSB Dev Test Build 9-22-10
1x RT-N16 - TomatoUSB SVN Build 9-13-10
lceron
DD-WRT User


Joined: 19 May 2007
Posts: 283
Location: Los Angeles, CA USA

PostPosted: Tue Oct 12, 2010 3:23    Post subject: Reply with quote
i know, i flashed the standard build k26 not the usb one which you are suggesting. another newbie error for not reading i guess. i have flashed my wrt54gs unit which is running great, but not the 310n
_________________
e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
lceron
DD-WRT User


Joined: 19 May 2007
Posts: 283
Location: Los Angeles, CA USA

PostPosted: Tue Oct 12, 2010 3:26    Post subject: Reply with quote
anyway, where are the pins that need to be shorted? see the link...

http://infodepot.wikia.com/wiki/Linksys_WRT310N_v1.0

_________________
e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
lceron
DD-WRT User


Joined: 19 May 2007
Posts: 283
Location: Los Angeles, CA USA

PostPosted: Tue Oct 12, 2010 4:14    Post subject: Reply with quote
success, i have brought it back from "brickness"

@ previous poster, can you please point me to the right file, for the tomato firmware?

_________________
e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
ddggttff3
DD-WRT User


Joined: 06 Mar 2009
Posts: 107
Location: MinneSOTA!

PostPosted: Tue Oct 12, 2010 22:13    Post subject: Reply with quote
replied to your PM.
_________________
My Hardware:
1x WNDR3300 - 14853 NEWD C/AP Mini-HotSpot-Kaid
1x WRT54G2 - 13577 NEWD RB Micro
1x WRT310N - TomatoUSB Dev Test Build 9-22-10
1x RT-N16 - TomatoUSB SVN Build 9-13-10
lceron
DD-WRT User


Joined: 19 May 2007
Posts: 283
Location: Los Angeles, CA USA

PostPosted: Wed Oct 13, 2010 15:24    Post subject: Reply with quote
thanks for your help, ddggttff3. how do i close or mark this post as solved?
_________________
e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
ddggttff3
DD-WRT User


Joined: 06 Mar 2009
Posts: 107
Location: MinneSOTA!

PostPosted: Wed Oct 13, 2010 15:33    Post subject: Reply with quote
edit your first post, change the title and add [Solved] to the front of it.
_________________
My Hardware:
1x WNDR3300 - 14853 NEWD C/AP Mini-HotSpot-Kaid
1x WRT54G2 - 13577 NEWD RB Micro
1x WRT310N - TomatoUSB Dev Test Build 9-22-10
1x RT-N16 - TomatoUSB SVN Build 9-13-10
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum