EA8500
DD-WRT v3.0-r39654 std (04/25/19)
Linux 4.9.170 #297 SMP Tue Apr 23 01:31:38 CEST 2019 armv7l
switch / ovpn server / samba share
working fine
might stick it on main EA8500 router to test since the VAP problem seems to be fixed
###
WNDR3700v4
DD-WRT v3.0-r39654 std (04/25/19)
Linux 3.18.138 #39290 Thu Apr 25 13:06:59 CEST 2019 mips
switch / ovpn server / samba share ext4
all I'm using is working ok
EA8500 main router
No Reset --- GUI install over r39575M
30 static leases
local DNS
QOS HFSC FQ_CODEL
ovpn server
samba share ext4 USB flash drive
isolated guest network -- ath0.1, ath1.1 & VLAN port 4 via br1
she just been up 01:08 but tis all worky ok
not too sure why this is still displayed when you login cause she no longer has DNScrypt I usually have the 'Display new Features' disbaled in the admin page but since Kong builds don't have it she popped up after install this BS build
---
EDIT:
Don't remember seeing this guy before in syslog but been long time since I had BS on main router.
Code:
daemon.info mstpd[730]: MSTP_OUT_set_ageing_time: br1:ath0.1 Setting new ageing time to 300
daemon.info mstpd[730]: MSTP_OUT_set_ageing_time: br1:ath1.1 Setting new ageing time to 300
daemon.info mstpd[730]: MSTP_OUT_set_ageing_time: br1:vlan4 Setting new ageing time to 300
daemon.info mstpd[730]: error, ethtool_get_speed_duplex: Cannot get speed/duplex for ath1.1: Not supported
daemon.info mstpd[730]: error, ethtool_get_speed_duplex: Cannot get speed/duplex for ath0.1: Not supported
In .../Networking.asp br1 had STP on so I changed it to MSTP just for hellofit...
... oh well it's all working good so far and that's what matters to me
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Fri Apr 26, 2019 14:21 Post subject:
Anyone checked the new mesh features? _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Fri Apr 26, 2019 15:06 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r39654 std (04/25/19)
Kernel Version Linux 3.18.138 #39264 Thu Apr 25 12:22:02 CEST 2019 mips
update: CLI 39572 > 39654
reset: NO
status: Operational 10h +
errors: look at tatsuya46 post above...
otherwise all is working on my set up....so far so good _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
that wifi latency looks pretty bad vs wired. wasn't it much better on kong build?
yeahuh, he's been on Debian/Buster for 'bout 9 months and I still throw a handful of updated packages at it everyday. Just done more updates and a reboot. He looks better now but I thinking upload is still little weak. It would help if dslreports would fix their stuff so I could see up/down graphs but BS_r39654 is all working good so far.
EA8500 uptime 07:48
laptop on 2.4GHz
http://www.dslreports.com/speedtest/49009117 http://www.dslreports.com/speedtest/49009201
---
EDIT:
I just have 50/50 fiber from ISP
Last edited by mrjcd on Fri Apr 26, 2019 22:00; edited 1 time in total
yeahuh, he's been on Debian/Buster for 'bout 9 months and I still throw a handful of updated packages at it everyday. Just done more updates and a reboot. He looks better now but I thinking upload is still little weak. It would help if dslreports would fix their stuff so I could see up/down graphs but BS_r39654 is all working good so far.
EA8500 uptime 07:48
laptop on 2.4GHz
http://www.dslreports.com/speedtest/49009117 http://www.dslreports.com/speedtest/49009201
ah looks better now
tatsuya46 wrote:
Router Model: dir-862L, dir-862L, wndr4300, r7800
Status: well it runs..
Reset: no
Errors: see tickets below
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Apr 26, 2019 16:45 Post subject:
jerrytouille wrote:
mrjcd wrote:
yeahuh, he's been on Debian/Buster for 'bout 9 months and I still throw a handful of updated packages at it everyday. Just done more updates and a reboot. He looks better now but I thinking upload is still little weak. It would help if dslreports would fix their stuff so I could see up/down graphs but BS_r39654 is all working good so far.
EA8500 uptime 07:48
laptop on 2.4GHz
http://www.dslreports.com/speedtest/49009117 http://www.dslreports.com/speedtest/49009201
ah looks better now
tatsuya46 wrote:
Router Model: dir-862L, dir-862L, wndr4300, r7800
Status: well it runs..
Reset: no
Errors: see tickets below
how about u tatsuya latency vs kong?
complete crap, theres not been a single ipq commit to bs builds fixing anything so im not surprised. still the same broken latency since k4 switch
mrjcd's is fine cause his line speed isnt fast enough to expose ipq806x k4.x problems, when i limit download to his speeds, its fine too. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r39654 std (04/25/19)
Kernel Version Linux 3.18.138 #39252 Thu Apr 25 12:11:22 CEST 2019 mips
Uptime 6:39
Reset: yes
Update from r39638 via telnet
Status: working OK as AP, NG-Mixed, HT40, QOS
Problems: nothing really important for me... Wiviz still doesn't show any neighbouring stations and the bottom /Wireless_Basic.asp tab looks like this https://forum.dd-wrt.com/phpBB2/files/annotation_2019_04_26_212604_107.jpg
I've never used Virtual Interfaces so I don't remember exactly what should be there but I assume it's not quite what it was in some previous versions before, I feel an "Add" button or something is missing.